Wyszukaj na stronie
Menu

S5 Quick Wax

Sea-Line Brayt S5 it is quick and easy in use product on base wax, recommended for every smooth and gloss surfaces (laminate, varnish and glass). After use S5 QUICK WAX we get color depth and gloss. Has an excellent hydrophobic and maintenance properties.

Does not leave streaks on the plastics and rubber surfaces. Sea-Line S5 Quick Wax is a product which is recommended after polishing surfaces with Sea-Line polishing compounds.

Wax can be used on surfaces exposed on sunlight. Does not leave streaks.

CapacityCode
500 ml12193
S5 Quick Wax

Technical informations

Color

  • White (after use – transparent)

Application method

  • hand (atomizer in set)

Product description "S5 Quick Wax"

S5 QUICK WAX, a hybrid wax that combines natural and synthetic wax, is a controlled and regulated method for adding shine and protection to any device. S5 creates a protective coating against UV radiation. The polymers contained in the wax prevent dirt from settling.

The wax can be used on gelcoats (laminate), paints, glass, plastics, rubber, and porous surfaces. There is no smudging or white residue. S5 wax can be applied to surfaces at elevated temperatures or exposed to direct sunlight during application.

Just apply wax to the surface and wipe dry. Enjoy the shine and depth of color for weeks to come. S5 QUICK WAX is equipped with a protective function or can be activated by the action of previously prepared waxes.

S5 Quick Wax - instructional video

Basic information

Typelaminates (gelcoat)
glass
varnished surfaces
plexi, polycarbonate
FunctionUV protection

Reduces the adhesion of dirt

hydrofobic

Textureliquid

Surface preparation

For daily cleaning of surfaces from dirt, use cleaning agents that are safe for wax protective layers:

  • Sea-Line® C3 SHAMPOO WITH WAX

You have questions about the product - S5 Quick Wax

    Use:

    • Before applying the wax, make sure that surface is clean and dry.
    • Spray S5 QUICK WAX on the surface. Apply only such an amount of product which can be spread on the surfaces before its dry.
    • Spread wax on the surface using microfiber cloth.
    • Wipe surfaces with a new microfiber cloth. To increase gloss we can use polishing machine with soft heads.

    Related articles

    Also check

    Our FAQ answers to frequently asked questions

    Why the paint does not have the right flow?

    Possible causes

    • No thinning, wrong thinner or wrong amount of thinner
    • Wrong type of roll or brush (wrong bristle lenght)
    • Applying too much or too Little paint,
    • During painting process temperature was too high or the air was too dry,
    • Incorrect preparation of too porous surface,
    • Incorrect proportion of thinner.

    How to prevent

    • Use a brush/Toller suited to the type of surface or paint,
    • Use thinner which is dedicated to the type of application and paints
    • Use thinning proportions which was indicated by manufacturer,
    • Paint in right atmosphere conditions indicated by manufacturer,

    How to remove

    • Grind, clean and paint again.

    Is it necessary to always sand the surface between application of two different products?

    We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.

    Contamination in topcoat paint?

    Possible causes

    • Inaccurate surface cleaning before paint application,
    • Incorrect painting tools preparation (brush and roll),
    • Performing work in a place exposed to constant contact with dust.

    How to prevent

    • Careful surface preparation (grinding, clearing, degreasing),
    • Careful painting tools preparation before use,
    • Maintain clean work environment

    How to remove

    • Grind, clean and paint again.
    Wyjście
    Przeiń na górę