Wyszukaj na stronie
Menu

Boot Düsseldorf

Welcome to the 50th International Boat Show Düsseldorf, short boot is the world’s largest and most important international. Boat Fair takes place annually in January on the grounds of Messe Düsseldorf.

The boot Düsseldorf celebrates from 19.-27. January 2019 her 50th Anniversary: 50 years of magical moments and moving stories, 50 years of impressive boats and yachts, trends in all areas of water sports and 50 years of enthusiastic visitors who love the element of water.

We are particularly pleased to participate in the boat this year and celebrate 10 years of SEA-LINE in the anniversary year.
Celebrate with us and meet us at the booth of Yachticon A. Nagel GmbH in hall 11, booth 11 F10.

We look forward to seeing you!

More info >>> Boot Dusseldorf

Boot Düsseldorf

Also check

Our FAQ answers to frequently asked questions

Why despite the use of antifouing paint the bottom of the boat is overgrown?

Possible causes

  • Too thin layer of antifouling paint,
  • Choosing the wrong antifouling to type of a boat or yacht
  • Thinning of antifouling paint,
  • Incorrect surface preparation before antifouling application.

How to prevent

  • Apply the right layer thickness of paint indicated by manufacturer,
  • Choose antifouling dedicated to type of boat or yacht and suitable for the type of water,
  • Do not thin antifouling because of the risk of reducing effectiveness,
  • Careful surface preparations (grinding, clearing, degreasing),

How to remove

  • Wet grinding, apply new layers of antifouling paint.
  • Use C1 shell and fouling remover.

Why the resin does not harden?

Possible causes

  • Too low temperature of ambitne,
  • Incorrect proportion of base and herdener,
  • Mixing two components from two different manufacturers

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during whole hardening process,
  • Mix the products thoroughly and bleed the mixture.

How to remove

  • The uncured mass requires complete removal from the surface.

Why are the streaks formed?

Possible causes

  • Wrong viscosity and spraying technique,
  • Failure to maintain proper evaporation time and thickness of layers,
  • Incorrect spraying pressure,
  • Too low temperature of varnish, surface or space ,
  • Wrong thinner or hardener.

How to prevent

  • Apply the right type of application method indicated by manufacturer,
  • Use working spray guns,
  • Both the object and material must have room temperature of 20ﹾC,
  • Apply correct proportion of base and hardener.

How to remove

  • Grinding and polishing,
  • Grinding and painting,
Wyjście
Przeiń na górę