Recommendation for LIGHTWEIGHT EPOXY FILLER – Sea Line

Lightweight epoxy filler Sea-Line was used also in our last custom sailing boat – catamaran Wave 58.

It’s very good material to finishing aluminum and composite structure. During few years of testing and using Sea Lines product we don’t have any complaint.

Bartosz Puchowski

www.creeyacht.pl

Rekomendowana szpachlowka epoksydowa lekka Sea Line

Do you have questions about "Recommendation for LIGHTWEIGHT EPOXY FILLER – Sea Line"

Also check

Sensational Bandzior
Renovation of the Spanish motorboat Ducauto caribe. “Cut in half, gutted and made according to
Sensational Bandzior
Cosmetics Sea-Line in Polish Army
Cosmetics Sea-Line use in Polish Army for cleaning and protect Sea Gun AM35 on „ORP
Cosmetics Sea-Line in Polish Army
Disco Volante – Wojciech Cieślik
Mr. Wojciech Ceiślik, boatbuilder Glen-L Squirt: „I recommend Sea-Line products to everyone who builds and
Disco Volante – Wojciech Cieślik
MAK 707
„… It was not easy, hard job on knees with mask and glasses. Feeling like
MAK 707

Our FAQ answers to frequently asked questions

We do not recommend using universal thinners. The use of a thinner with an unknown composition may result in loss of adhesion, lack of proper flow of paint and varnish defects.

Possible causes

Too low temperature of ambitne,
Incorrect proportion of base and herdener,
Mixing two components from two different manufacturers

How to prevent

Apply the correct proportions of components
Maintain steady temperature (around 20ﹾC) during whole hardening process,
Mix the products thoroughly and bleed the mixture.

How to remove

The uncured mass requires complete removal from the surface.

Do not add more hardener, because after the base has cured, the remaining hardener will react with subsequent layers, which will be applied to the surface and cause defects. For the product to work properly, please follow the proportions given by the manufacturer.