Wyszukaj na stronie

Disco Volante – Wojciech Cieślik

Mr. Wojciech Ceiślik, boatbuilder Glen-L Squirt:

„I recommend Sea-Line products to everyone who builds and renovates boats. I use product Sea-Line for bulding my motorboat „DISCO VOLANTE”:

  • Epoxy Lightprimer 5:1
  • Thinner for epoxy primer
  • Polyurethan 2:1 (Black)
  • Polyurethan Clear Coat High Gloss
  • Thinner for polyurethan:
    • Brush /Roll
    • Spray
  • Accesories for manual application of paint:
    • Brush Sea-Line
    • Roll Sea-Line
Disco Volante – Wojciech Cieślik
  • disco volante glen l squirt boat made by wojciech cieslik pl szkielet
  • disco volante glen l squirt boat made by wojciech cieslik pl
  • disco volante glen l squirt boat made by wojciech cieslik pl kolejna warstwa podkadu
  • disco volante glen l squirt boat made by wojciech cieslik pl f podkladkowa
  • disco volante glen l squirt boat made by wojciech cieslik pl f kolor
  • disco volante glen l squirt boat made by wojciech cieslik pl malowanie bezbarwnym
  • disco volante glen l squirt boat made by wojciech cieslik pl
  • disco volante glen l squirt boat made by wojciech cieslik pl
  • disco volante glen l squirt boat made by wojciech cieslik pl
  • Disco Volante
  • disco volante glen l squirt boat made by wojciech cieslik pl materiay

Do you have questions about "Disco Volante – Wojciech Cieślik"

    Also check

    Our FAQ answers to frequently asked questions

    Why the paint does not have the right flow?

    Possible causes

    • No thinning, wrong thinner or wrong amount of thinner
    • Wrong type of roll or brush (wrong bristle lenght)
    • Applying too much or too Little paint,
    • During painting process temperature was too high or the air was too dry,
    • Incorrect preparation of too porous surface,
    • Incorrect proportion of thinner.

    How to prevent

    • Use a brush/Toller suited to the type of surface or paint,
    • Use thinner which is dedicated to the type of application and paints
    • Use thinning proportions which was indicated by manufacturer,
    • Paint in right atmosphere conditions indicated by manufacturer,

    How to remove

    • Grind, clean and paint again.

    Can I use selfpolishing Sea-Line and HARD Sea-Line antifoulings on aluminium boat?

    Sea-Line HARD and Sea-Line self-polishing antifouling are not intended for aluminum surfaces. They include copper oxide, which in contact with aluminum causes galvanic corrosion. Especially on aluminum, we offer ALU-PLUS self-polishing anti-fouling paint, which, in addition to excellent adhesion to aluminum, is also 30% more effective than traditional anti-fouling paints.

    Why despite the use of antifouing paint the bottom of the boat is overgrown?

    Possible causes

    • Too thin layer of antifouling paint,
    • Choosing the wrong antifouling to type of a boat or yacht
    • Thinning of antifouling paint,
    • Incorrect surface preparation before antifouling application.

    How to prevent

    • Apply the right layer thickness of paint indicated by manufacturer,
    • Choose antifouling dedicated to type of boat or yacht and suitable for the type of water,
    • Do not thin antifouling because of the risk of reducing effectiveness,
    • Careful surface preparations (grinding, clearing, degreasing),

    How to remove

    • Wet grinding, apply new layers of antifouling paint.
    • Use C1 shell and fouling remover.
    Wyjście
    Przeiń na górę