Wyszukaj na stronie
Menu

Epoxy Filler Universal

Epoxy fillers are primarily the only fillers recommended for use on hull components constantly immersed in water.

However, they can be successfully used both above and below the waterline.

WeightCode
750 g12200
7,5 kg12286
Epoxy Filler Universal

Technical informations

Application method

Manually:

  • putty knife

Product description "Epoxy Filler Universal"

  • Small repair caused by the action of osmosis.
  • Healed minor damage, small cracks and scratches.
  • Easy to mix and application.
  • Cans contain a volume of components where is left place for mixing components.
  • The advantage of this filler is convenient, relatively short curing time.
  • 40 minutes – pot life 20°C
  • 15 hours – hard for sanding 20°C
  • 2:1 – mixing by volume
  • 100:50 – mixing by weight
  • The previous layer: epoxy primer Sea-Line, two-component paints.
  • The next layer: epoxy Primers, 1K universal yachtprimer , antifouling paints.

Epoxy Filler Universal - instructional video

Basic information

Type of surfaceGRP laminates, wood steel, aluminum
PlaceAbove and below waterline
FunctionFast repairs small scratches and damages
Colorlight grey

You have questions about the product - Epoxy Filler Universal

    Also check

    Our FAQ answers to frequently asked questions

    Can I paint a boat, previously painted with 1 component paint, with polyurethane?

    It is not recommended to apply 2K paints over 1K paints. 1K and 2K inks differ in their composition and properties, including hardness, chemical resistance and durability. 1K paints are one-component and dry by evaporating the solvent, while 2K paints are two-component and need to be cured by adding a hardener. Applying 2K paint over 1K paint can cause unpredictable chemical reactions and lead to undesirable effects such as dulling, chipping or flaking of the paint. Therefore, always use paints according to the manufacturer’s instructions and do not mix different types of paints. farby zgodnie z instrukcjami producenta i nie mieszać różnych rodzajów farb.

    Why the epoxy filler does not harden?

    Possible causes

    • Incorrect proportion of base and herdener,
    • Too low temperature of ambient and surface (less than 10ﹾC),
    • Mixing two components from two different manufacturers,

    How to prevent

    • Apply the correct proportions of components
    • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
    • Use base and hardener from the same manufacturer

    How to remove

    • The uncured mass requires complete removal from the surface.

    Contamination in topcoat paint?

    Possible causes

    • Inaccurate surface cleaning before paint application,
    • Incorrect painting tools preparation (brush and roll),
    • Performing work in a place exposed to constant contact with dust.

    How to prevent

    • Careful surface preparation (grinding, clearing, degreasing),
    • Careful painting tools preparation before use,
    • Maintain clean work environment

    How to remove

    • Grind, clean and paint again.
    Wyjście
    Przeiń na górę