Wyszukaj na stronie
Menu

S08 Industrial Force Cut – Polishing Paste

Primarily designed for the companies which produce goods or forms made of gelcoat or an industrial topcoat with a high toughness degree.

WeightCode
Bucket 1 kg12884
Bottle 1 kg13173
S08 Industrial Force Cut – Polishing Paste
  • Cut level = 10
  • Gloss level = 3

Does not contains silicons or fillers

Technical informations

Color

  • white

Product description "S08 Industrial Force Cut – Polishing Paste"

S08 Industrial Force Sea-Line removes grinding scratches from gelcoat surface  after treatment with sandpaper of gradation P600 or higher.

Using S08 Industrial Force compound allows for shortening the labour time thanks to a high cutting force.

Specialistic polishing paste with a very high cutting force which guarantee quick removal of defects and grinding scratches from a different kind of gelcoat  (especially for polishing of industrial gelcoat)

Surfaces:

  • gelcoat in white color
  • tool gelcoat
  • hard gelcoat
  • hard industrial varnishes

Polishing:

  • rotary machine

Advantages:

  • Most available cutting force
  • it does not clog and does not stick fibers of woolen pads

Basic information

Surfaceswhite gelcoat
gelcoat finished products
tool gelcoat
industrial varnishes
Categoryproduction
Functionremoving defects from the surface
Consistencypaste
Surface preparation *mechanical grindingmanual grinding
light colordark colorlight colordark color
gelcoatP600⇒P800⇒P800⇒P1200⇒
tool gelcoat (technical)P800⇒P1200⇒P2000⇒
high hardness surfacesP800⇒P1200⇒P2000⇒

Details of the application method

  • Surface preparation:

    Clean surface destined for polishing.

    Sposób aplikacji - S08 Industrial Force Cut – Polishing Paste

    Polish surface with sandpaper of final gradation : minimum P600 →

  • Sposób aplikacji - S08 Industrial Force Cut – Polishing Paste

    Dark colours or hard surfaces polish with sandpaper of final gradation : minimum P800 →.

  • Polishing:

    Sposób aplikacji - S08 Industrial Force Cut – Polishing Paste

    Clean surface, apply compound onto an element or head (wool or tough sponge)

  • Sposób aplikacji - S08 Industrial Force Cut – Polishing Paste

    Apply compound at minimum rotations on the whole surface that is being polished (800-1000 rotations/min) polishing until it changes colour and compound changes its texture

  • Sposób aplikacji - S08 Industrial Force Cut – Polishing Paste

    Slowly increase speed max. to 1800 RPM working with a little pressure

  • Further steps:

    Sposób aplikacji - S08 Industrial Force Cut – Polishing Paste

    Clean surface. If after using S08 left any defects:

    • use S05 or S1 Premium
    • S1 Premium – recommended is to changed applicator to a head made of 100% lambswool ( TYPE MM SEA-LINE BRAYT)

  • In order to protect surface, it is recommended to use:

    • S4 PROTECT WAX
    • S5 QUICK WAX

You have questions about the product - S08 Industrial Force Cut – Polishing Paste

    Related articles

    Also check

    Our FAQ answers to frequently asked questions

    Why are the streaks formed?

    Possible causes

    • Wrong viscosity and spraying technique,
    • Failure to maintain proper evaporation time and thickness of layers,
    • Incorrect spraying pressure,
    • Too low temperature of varnish, surface or space ,
    • Wrong thinner or hardener.

    How to prevent

    • Apply the right type of application method indicated by manufacturer,
    • Use working spray guns,
    • Both the object and material must have room temperature of 20ﹾC,
    • Apply correct proportion of base and hardener.

    How to remove

    • Grinding and polishing,
    • Grinding and painting,

    Why despite the use of antifouing paint the bottom of the boat is overgrown?

    Possible causes

    • Too thin layer of antifouling paint,
    • Choosing the wrong antifouling to type of a boat or yacht
    • Thinning of antifouling paint,
    • Incorrect surface preparation before antifouling application.

    How to prevent

    • Apply the right layer thickness of paint indicated by manufacturer,
    • Choose antifouling dedicated to type of boat or yacht and suitable for the type of water,
    • Do not thin antifouling because of the risk of reducing effectiveness,
    • Careful surface preparations (grinding, clearing, degreasing),

    How to remove

    • Wet grinding, apply new layers of antifouling paint.
    • Use C1 shell and fouling remover.

    Can I add more hardener to speed up the reaction?

    Do not add more hardener, because after the base has cured, the remaining hardener will react with subsequent layers, which will be applied to the surface and cause defects. For the product to work properly, please follow the proportions given by the manufacturer.

    Wyjście
    Przeiń na górę