Wyszukaj na stronie
Menu

S4 Protect Wax

Perfect gloss with lasting effect and protective cover. Reduces the adhesion of dirt. Suitable for gelcoat and painted surfaces.

CapacityCode
250 ml300006977
S4 Protect Wax

Technical informations

Color

  • White (after use transparent)

Application method

The surface must be clean and dry. Apply in a thin layer and rub with a soft microfiber cloth.

Product description "S4 Protect Wax"

Sea-Line® S4 PROTECTIVE WAX is an excellent gloss and long-lasting protective layer.

Sea-Line® S4 protective wax reduces the adhesion of dirt to the surface, creating a protective hydrophobic layer. It is recommended for laminate and painted surfaces, protecting them from UV radiation.

Apply Sea-Line® S4 protective wax with a soft cloth, evenly and thinly spread the wax over the entire surface. Sea-Line® S4 protective wax does not leave streaks or discoloration.

The S4 protective wax can be additionally polished by hand or mechanically to achieve a higher surface gloss.

Surface preparation

To prevent accidental removal of the protective layer created using Sea-Line® S4 PROTECTIVE WAX by overly aggressive products, it is recommended to use for regular washing and cleaning of surfaces:

  • Sea-Line® C3 SHAMPOO WITH WAX

Details of the application method

  • Sposób aplikacji - S4 Protect Wax

    Using a microfiber cloth, wipe the applied layer of wax until the wax is completely buffed on the surface.

  • Sposób aplikacji - S4 Protect Wax

    For a higher level of gloss, it is recommended to polish the surface using a microfiber cloth, a mechanical polisher, or a soft sponge.

You have questions about the product - S4 Protect Wax

    Related articles

    Also check

    Our FAQ answers to frequently asked questions

    Can I mix polyurethane paints to get a different color?

    Yes, you can mix Sea-Line polyurethane paints. The only difference are the pigments of polyurethane paints that determine the color of the paint. But remember to keep the right proportions of base, hardener and thinner.

    Why the resin does not harden?

    Possible causes

    • Too low temperature of ambitne,
    • Incorrect proportion of base and herdener,
    • Mixing two components from two different manufacturers

    How to prevent

    • Apply the correct proportions of components
    • Maintain steady temperature (around 20ﹾC) during whole hardening process,
    • Mix the products thoroughly and bleed the mixture.

    How to remove

    • The uncured mass requires complete removal from the surface.

    Why the paint does not have the right flow?

    Possible causes

    • No thinning, wrong thinner or wrong amount of thinner
    • Wrong type of roll or brush (wrong bristle lenght)
    • Applying too much or too Little paint,
    • During painting process temperature was too high or the air was too dry,
    • Incorrect preparation of too porous surface,
    • Incorrect proportion of thinner.

    How to prevent

    • Use a brush/Toller suited to the type of surface or paint,
    • Use thinner which is dedicated to the type of application and paints
    • Use thinning proportions which was indicated by manufacturer,
    • Paint in right atmosphere conditions indicated by manufacturer,

    How to remove

    • Grind, clean and paint again.
    Wyjście
    Przeiń na górę