Wyszukaj na stronie
Menu

S5 Quick Wax

Sea-Line Brayt S5 it is quick and easy in use product on base wax, recommended for every smooth and gloss surfaces (laminate, varnish and glass). After use S5 QUICK WAX we get color depth and gloss. Has an excellent hydrophobic and maintenance properties.

Does not leave streaks on the plastics and rubber surfaces. Sea-Line S5 Quick Wax is a product which is recommended after polishing surfaces with Sea-Line polishing compounds.

Wax can be used on surfaces exposed on sunlight. Does not leave streaks.

CapacityCode
500 ml12193
S5 Quick Wax

Technical informations

Color

  • White (after use – transparent)

Application method

  • hand (atomizer in set)

Product description "S5 Quick Wax"

Wash the surface before use Sea-Line® S5 QUICK WAX:

  • Sea-Line® C1 BOTTOM CLEANER (shell and fouling remover)
  • Sea-Line® C2 CONCENTRATE CLEANER
  • Sea-Line® S3 SHAMPOO WITH WAX

Basic information

Typelaminates (gelcoat)
glass
varnished surfaces
plexi, polycarbonate
FunctionUV protection

Reduces the adhesion of dirt

hydrofobic

Textureliquid

Surface preparation

For daily cleaning of surfaces from dirt, use cleaning agents that are safe for wax protective layers:

  • Sea-Line® C3 SHAMPOO WITH WAX

You have questions about the product - S5 Quick Wax

    Use:

    • Before applying the wax, make sure that surface is clean and dry.
    • Spray S5 QUICK WAX on the surface. Apply only such an amount of product which can be spread on the surfaces before its dry.
    • Spread wax on the surface using microfiber cloth.
    • Wipe surfaces with a new microfiber cloth. To increase gloss we can use polishing machine with soft heads.

    Related articles

    Also check

    Our FAQ answers to frequently asked questions

    Why the resin does not harden?

    Possible causes

    • Too low temperature of ambitne,
    • Incorrect proportion of base and herdener,
    • Mixing two components from two different manufacturers

    How to prevent

    • Apply the correct proportions of components
    • Maintain steady temperature (around 20ﹾC) during whole hardening process,
    • Mix the products thoroughly and bleed the mixture.

    How to remove

    • The uncured mass requires complete removal from the surface.

    Why the paint does not have the right flow?

    Possible causes

    • No thinning, wrong thinner or wrong amount of thinner
    • Wrong type of roll or brush (wrong bristle lenght)
    • Applying too much or too Little paint,
    • During painting process temperature was too high or the air was too dry,
    • Incorrect preparation of too porous surface,
    • Incorrect proportion of thinner.

    How to prevent

    • Use a brush/Toller suited to the type of surface or paint,
    • Use thinner which is dedicated to the type of application and paints
    • Use thinning proportions which was indicated by manufacturer,
    • Paint in right atmosphere conditions indicated by manufacturer,

    How to remove

    • Grind, clean and paint again.

    Why despite the use of antifouing paint the bottom of the boat is overgrown?

    Possible causes

    • Too thin layer of antifouling paint,
    • Choosing the wrong antifouling to type of a boat or yacht
    • Thinning of antifouling paint,
    • Incorrect surface preparation before antifouling application.

    How to prevent

    • Apply the right layer thickness of paint indicated by manufacturer,
    • Choose antifouling dedicated to type of boat or yacht and suitable for the type of water,
    • Do not thin antifouling because of the risk of reducing effectiveness,
    • Careful surface preparations (grinding, clearing, degreasing),

    How to remove

    • Wet grinding, apply new layers of antifouling paint.
    • Use C1 shell and fouling remover.
    Wyjście
    Przeiń na górę