Wyszukaj na stronie

C2 Concentrate Cleaner

Very powerful water soluble and biodegradable cleaner for quick and efficient removal of oil, grease, scale, soot, nicotine etc. Great as a professional cleaner for fenders, tarpaulins, poles and aluminum ship components and for the removal of hydraulic oil .

Thin with water. For normal dirt add 1 part of C2 on 10 parts of water. For heavy dirt add 1 part C2 on 5 parts of water. Can be diluted with hot and cold water. Use cloth or soft brush. After treatment, always rinse with plenty of water.

CapacityCode
500 ml300006979
5 l300007096
C2 Concentrate Cleaner

Color

  • red (transparent)

Application method

Manually:

  • soft brush
  • cloth

Product description "C2 Concentrate Cleaner"

Sea-Line® C2 CONCENTRATE CLEANER is a concentrated product for cleaning GPR off lingering contaminants. It is a very powerful biodegradable, water soluble cleaner for quick and efficient removal of contaminants from such surfaces as:

  • GRP laminate
  • varnished surfaces
  • aluminium (masts, fittings)
  • PCV (pontoons).
  • rubber (reflectors, rubbing strakes, gaskets).
  • textiles (tents, covers, tarpaulins).

The modern formula of Sea-Line® C2 Concentrate Cleaner combined with a possibility of diluting the product, depending on the degree of contamination, makes it ideal for removing:

  • grease
  • oils (also hydraulic ones),
  • soot
  • discolorations and damp patches caused by rainfalls
  • other contaminants difficult to remove

You have questions about the product - C2 Concentrate Cleaner

    c czyszczenie zelkotu przed

    How to restore gelcoat?

    Our vessels may sometimes look like the one in the picture below. We can quickly and easily make it look nice. C2 Concentrate Cleaner can be used on all kinds of gelcoats and varnishes.

    c proporcja mieszania

    STEP 1 – Prepare Sea-line C2 Concentrate Cleaner

    Thin Sea-Line® C2 with water at a ratio of:

    • 1:5 for heavy contaminants
    • 1:10 for average contaminants

    c czyszczenie laminatu

    STEP 2 – Cleaning GPR

    Before starting work, clean the surface from contamination, e.g. sand. Using a sponge or a brush, apply C2 Concentrate Cleaner.

    c czyszczenie laminatu

    STEP 3 – Cleaning GPR

    Non-slip surface or heavily soiled elements, scrub with a soft brush.

    c czyszczenie laminatu plukanie

    STEP 4 – Rinse

    Removed contaminants and the product residues, rinse abundantly with water. Do not let contaminants dry out on the cleaned surface.

    c czyszczenie laminatu polerowanie

    STEP 5 – Protecting GPR/varnish

    To increase gloss, the surface may additionally be polished by using Sea-Line S1 or Sea-line S0 compound.

    c czyszczenie laminatu woskowanie

    The cleaned surface protect (optionally) with Sea-Line S4 Protect Wax & Sea-Line S3 Clean & Protect spray

    c czyszczenie laminatu porownanie

    Sea-Line® C2 CONCENTRATE CLEANER

    The picture shows a cleaned surface (right side) and its condition before using C2 Concentrate Cleaner (left side).

    Also check

    Our FAQ answers to frequently asked questions

    Do you have to paint the scratched side of the boat?

    If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.

    Contamination in topcoat paint?

    Possible causes

    • Inaccurate surface cleaning before paint application,
    • Incorrect painting tools preparation (brush and roll),
    • Performing work in a place exposed to constant contact with dust.

    How to prevent

    • Careful surface preparation (grinding, clearing, degreasing),
    • Careful painting tools preparation before use,
    • Maintain clean work environment

    How to remove

    • Grind, clean and paint again.

    Why did the polyurethane topcoat become dull?

    Possible causes

    • Too short time for evaporation of the thinner,

    How to prevent

    • Maintain the right conditions for complete evaporation of the thinner,

    How to remove

    • Mat the surface, degrease and apply the paint according to the rule (right conditions and thinning proportions)
    • Polish surface if needed.
    Wyjście
    Przeiń na górę