Wyszukaj na stronie
Menu

Epoxy resin

Our epoxy resin works well both in construction and during repairs of damaged boat and yacht parts.

WeightCode
250 g3636
0,5 kg8483
0,9 kg8508
5 kg8506 (comp. A) / 8507 (comp. B)
Epoxy resin

Technical informations

Color

  • Transparente

Application method

Manually:

  • brush
  • roller

Product description "Epoxy resin"

  • Sea-Line® structural epoxy is a comprehensive application.
  • It works in both the construction and repair of damaged parts of the boat.
  • This resin is recommended for laminating, sealing, enhancing the surface, bonding and linking the various elements of the structure.
  • In conjunction with the glass mat, it is used for manual repairs of substantial damage.
  • The coating has very good adhesion to any type of substrate and very high resistance and hardness.
  • Component A and B is colorless.
  • To obtain a full-fledged and adequately strong laminate, use a 2:1 weight ratio of resin to fibre glass mat for epoxy or a 1:1 weight ratio of resin to glass fabric.
  • To finish laminated surfaces we recommend using Sea-Line® epoxy fillers, Sea-Line® epoxy primers and Sea-Line® topcoats.

Basic information

TypeLaminates, wood, steel, aluminum
PlaceAbove and below waterline
FunctionLaminating, repairs, reinforcement, gluing
ApplicationBrush, roll
ThinningNot recommended
 Theoretical coverage for 1kg

(for 1 layer laminate)

performance for layer of laminate based on glass fibre mats
300 g/m²

450 g/m²

~1,7 m²

~1,1 m²

performance for layer of laminate based on glass fabric (roving)
200 g/m²

400 g/m²

~5 m²

~2,5 m²

Coats numberDepend on needs
Pot life 23°C45 min
Hardening time7 h

Surface preparation

The resin is available in 3 sets:

  • Set of 250 g
    includes an epoxy resin with hardener, fabric glass (0,25 m 2), disposable gloves, a brush and a cup with a scale for easy dosing of ingredients and instructions for repair.
  • Set of 0,9 kg
    includes an epoxy resin with hardener
  • Set of 0,5 kg and 5,0 kg
    includes an epoxy resin with hardener

You have questions about the product - Epoxy resin

    Also check

    Our FAQ answers to frequently asked questions

    Can I add more hardener to speed up the reaction?

    Do not add more hardener, because after the base has cured, the remaining hardener will react with subsequent layers, which will be applied to the surface and cause defects. For the product to work properly, please follow the proportions given by the manufacturer.

    Why are the streaks formed?

    Possible causes

    • Wrong viscosity and spraying technique,
    • Failure to maintain proper evaporation time and thickness of layers,
    • Incorrect spraying pressure,
    • Too low temperature of varnish, surface or space ,
    • Wrong thinner or hardener.

    How to prevent

    • Apply the right type of application method indicated by manufacturer,
    • Use working spray guns,
    • Both the object and material must have room temperature of 20ﹾC,
    • Apply correct proportion of base and hardener.

    How to remove

    • Grinding and polishing,
    • Grinding and painting,

    Why the epoxy filler does not harden?

    Possible causes

    • Incorrect proportion of base and herdener,
    • Too low temperature of ambient and surface (less than 10ﹾC),
    • Mixing two components from two different manufacturers,

    How to prevent

    • Apply the correct proportions of components
    • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
    • Use base and hardener from the same manufacturer

    How to remove

    • The uncured mass requires complete removal from the surface.
    Wyjście
    Przeiń na górę