Wyszukaj na stronie
Menu

Epoxy repair kit

This is the Sea-Line epoxy repair kit, designed for repairing minor damages to boat parts.

The epoxy repair kit contains essential products that enable you to carry out the repair.

WeightCode
250 g3636
Epoxy repair kit

Technical informations

Color

  • Clear

Application method

Manually:

  • brush
  • roller

Product description "Epoxy repair kit"

Sea-Line® structural epoxy is a comprehensive application:

  • It works in both the construction and repair of damaged parts of the boat.
  • This resin is recommended for laminating, sealing, enhancing the surface, bonding and linking the various elements of the structure.
  • In conjunction with the glass mat, it is used for manual repairs of substantial damage.
  • The coating has very good adhesion to any type of substrate and very high resistance and hardness.
  • Component A and B is colorless.

To obtain a full-fledged and adequately strong laminate, use a 2:1 weight ratio of resin to fibre glass mat for epoxy or a 1:1 weight ratio of resin to glass fabric.

To finish laminated surfaces we recommend using Sea-Line® epoxy fillers, Sea-Line® epoxy primers and Sea-Line® topcoats.

The resin is available in three sets:

  • epoxy resin with hardener
  • fabric glass (0,25 m 2)
  • disposable gloves
  • a brush and a cup with a scale for easy dosing of ingredients
  • instructions for repair

Basic information

TypeLaminates, wood, steel, aluminium
PlaceAbove and below waterline
FunctionLaminating, repairs, reinforcement, gluing
AplplicationBrush, roll
Coats numberDepend on needs
Pot life 23°C45 min
Hardening time7 h

You have questions about the product - Epoxy repair kit

    Also check

    Our FAQ answers to frequently asked questions

    Why did the polyurethane topcoat become dull?

    Possible causes

    • Too short time for evaporation of the thinner,

    How to prevent

    • Maintain the right conditions for complete evaporation of the thinner,

    How to remove

    • Mat the surface, degrease and apply the paint according to the rule (right conditions and thinning proportions)
    • Polish surface if needed.

    Why despite the use of antifouing paint the bottom of the boat is overgrown?

    Possible causes

    • Too thin layer of antifouling paint,
    • Choosing the wrong antifouling to type of a boat or yacht
    • Thinning of antifouling paint,
    • Incorrect surface preparation before antifouling application.

    How to prevent

    • Apply the right layer thickness of paint indicated by manufacturer,
    • Choose antifouling dedicated to type of boat or yacht and suitable for the type of water,
    • Do not thin antifouling because of the risk of reducing effectiveness,
    • Careful surface preparations (grinding, clearing, degreasing),

    How to remove

    • Wet grinding, apply new layers of antifouling paint.
    • Use C1 shell and fouling remover.

    Can I use selfpolishing Sea-Line and HARD Sea-Line antifoulings on aluminium boat?

    Sea-Line HARD and Sea-Line self-polishing antifouling are not intended for aluminum surfaces. They include copper oxide, which in contact with aluminum causes galvanic corrosion. Especially on aluminum, we offer ALU-PLUS self-polishing anti-fouling paint, which, in addition to excellent adhesion to aluminum, is also 30% more effective than traditional anti-fouling paints.

    Wyjście
    Przeiń na górę