Wyszukaj na stronie
Menu

Polyester repair kit

The polyester repair kit includes polyester structural resin along with fiberglass mat.

Sea-Line® polyester resin combined with fiberglass mat is used for manual repairs, recommended for laminating, reinforcing surfaces, patching holes – especially in situations where the speed of repair execution is crucial.

WeightCode
250 g2392
Polyester repair kit

Technical informations

Color

  • Clear

Application method

Manually:

  • Brush
  • Roller

Product description "Polyester repair kit"

  • Sea-Line® structural polyester resin is recommended for laminating, reinforcing the surface, and patching holes and damage – especially in situations where the most important is a fast repair time.
  • In conjunction with the glass mat, it is used for manual repairs of damage.To obtain a fully-fledged and adequately strong laminate, use a 2:1 weight ratio of resin to glass mat for polyester or a 1:1 weight ratio of resin to glass fabric.
  • To finish laminated surfaces we recommend using Sea-Line® fillers, Sea-Line® epoxy primers, Sea-Line® topcoats or a Sea-Line® gelcoat repair kit.

Basic information

TypeLaminates, steel
PlaceAbove and below waterline
FunctionLaminating, filling damages
ApplicationBrush, roll
Theoretical coverage0,5 m²
Coats numberAccording needs
Pot life 20°C10-15 min
Hardening time45 min

Surface preparation

The resin is available in set (Set of 250 g):

  • contains a polyester structural resin
  • hardener
  • fibre glass mat (0,25m2)
  • disposable gloves
  • a brush and a cup with a scale for easy dosing of ingredients
  • instructions for repair

You have questions about the product - Polyester repair kit

    Also check

    Our FAQ answers to frequently asked questions

    Why did the polyurethane topcoat become dull?

    Possible causes

    • Too short time for evaporation of the thinner,

    How to prevent

    • Maintain the right conditions for complete evaporation of the thinner,

    How to remove

    • Mat the surface, degrease and apply the paint according to the rule (right conditions and thinning proportions)
    • Polish surface if needed.

    Why the epoxy filler does not harden?

    Possible causes

    • Incorrect proportion of base and herdener,
    • Too low temperature of ambient and surface (less than 10ﹾC),
    • Mixing two components from two different manufacturers,

    How to prevent

    • Apply the correct proportions of components
    • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
    • Use base and hardener from the same manufacturer

    How to remove

    • The uncured mass requires complete removal from the surface.

    Contamination in topcoat paint?

    Possible causes

    • Inaccurate surface cleaning before paint application,
    • Incorrect painting tools preparation (brush and roll),
    • Performing work in a place exposed to constant contact with dust.

    How to prevent

    • Careful surface preparation (grinding, clearing, degreasing),
    • Careful painting tools preparation before use,
    • Maintain clean work environment

    How to remove

    • Grind, clean and paint again.
    Wyjście
    Przeiń na górę