Lamination – fiberglass and glassfabric

Fiberglass reinforcements, including boat mats and fiberglass fabrics combined with resin, are used for repairs of boats, yachts, camping trailers, and other laminate products. The repaired elements can be made of laminate, steel, aluminum, and of course, wood.

Undoubtedly, coatings obtained using resin along with fiberglass mat or fabric have good adhesion to the substrate, are durable, resistant to gasoline, oils, greases, and also to short-term exposure to temperatures up to 70°C.

To finish laminated surfaces we recommend to use:

epoxy fillers Sea-Line®
epoxy primers Sea-Line®
topcoats Sea-Line®

Product description "Lamination – fiberglass and glassfabric"

Glass Fibre Mate
Glass fibre mat, in connection with laminating resin, is used for the repairs of big holes in boats, yachts, camping caravans, etc. The repaired elements may be made from steel, aluminum or GRP, reinforced with glass fibre. The obtained layers have very good adherence, are durable, resistant to petrol, oils, greases, and the short period temperatures up to 70ºC.

Glass Fabric
Glass fabric are used in the production of laminates, as a resin reinforcement. Allows for a higher glass content in the laminate and better durability. Minimizes the amount of resin necessary for the production of laminates while increasing durability.

To obtain a full-fledged and adequately strong laminate, use a 2:1 weight ratio of resin to fibre glass mat or 1:1 weight ratio of resin to glass fabric.

Glass fiber mat for polyester resin

pack	g / m²	code	theoretical efficiency resin for 1 pack
1 m²	150 g / m²	4490	~ 300 g
	300 g / m²	4493	~ 600 g
	450 g / m²	4496	~ 900 g
3 m²	150 g / m²	4491	~ 900 g
	300 g / m²	4494	~ 1,8 kg
	450 g / m²	4499	~ 2,7 kg

Glass fiber mat for epoxy resin

pack	g / m²	code	theoretical efficiency resin for 1 pack
1 m²	300 g / m²	4480	~ 600 g
1 m²	450 g / m²	4483	~ 900 g
3 m²	300 g / m²	4481	~ 1,8 kg
3 m²	450 g / m²	4484	~ 2,7 kg

Glass fabric for polyester and epoxy resin

pack	g / m²	code	theoretical efficiency resin for 1 pack
1 m²	200 g / m²	4464	~ 200 g
1 m²	400 g / m²	4466	~ 400 g
3 m²	200 g / m²	4465	~ 600 g
3 m²	400 g / m²	4467	~ 1, 2 kg

Also check

Parafina Sea-Line
Paraffin is an additive mainly to polyester gelcoats, necessary when it is necessary to apply
Parafina Sea-Line
Polymer
Is elastic sealant recommended for sealing and bonding various types of materials.
Polymer
Non Skid Powder
Non skid powder is anadditive for polyurethane topcoats. Non-slip powder = 20 grams, the amount
Non Skid Powder

Our FAQ answers to frequently asked questions

Possible causes

Inaccurate surface cleaning before paint application,
Incorrect painting tools preparation (brush and roll),
Performing work in a place exposed to constant contact with dust.

How to prevent

Careful surface preparation (grinding, clearing, degreasing),
Careful painting tools preparation before use,
Maintain clean work environment

How to remove

Grind, clean and paint again.

We do not sell retail. Our products can be found in many stores in Poland and abroad. Our distributors run stationary and online stores. The full list of distributors and contacts can be found on our website at the following link click here.

Do not add more hardener, because after the base has cured, the remaining hardener will react with subsequent layers, which will be applied to the surface and cause defects. For the product to work properly, please follow the proportions given by the manufacturer.