Brush Roll Thinner For Polyurethan

Brush and roll thinner for polyurethane color and high gloss polyurethane clear coat. Thinner for the application of brush and roll polyurethane topcoats — colored and colorless.

It is very important to use paint thinners, which provide the appropriate parameters of paint – flow, potlife, time of drying.

Pojemność	Kod
250 ml	7115
1 l	5746

Technical informations

Application method

Brush / Roll

Product description "Brush Roll Thinner For Polyurethan"

The use of the appropriate thinner recommended by the manufacturer not only ensures proper technical parameters during application but also satisfactory final results.

Thinner for polyurethane paints is a mixture of carefully selected solvents, and its use allows obtaining a product with strictly defined parameters. Brushthinner 2K PU provides proper comfort during application and the correct curing time of the paint when applied with a brush and roller. The thinner ensures the preservation of properties and parameters such as flowability, working time, and curing speed.

Color :	RAL
White	____	20–25%
Light ivory	1015	20–25%
Ruby red	3003	15-20%
Sapphire blue	5003	15-20%
Sky blu	5015	20-25%
Mint green	6029	15–20%
Squirrel grey	7000	15–20%
Jet black	9005	15–20%
High Gloss PRIMER function	x	15-20 %
High Gloss TOPCOAT function	x	0-5 %

Also check

Spray Thinner For Polyurethan
Spray thinner for polyurethane color and high gloss polyurethane clear coat. Thinner for the application
Spray Thinner For Polyurethan
Thinner For 1k (Primer, Varnish, Enamel)
It is very important to use paint thinners, which provide the appropriate parameters of paint
Thinner For 1k (Primer, Varnish, Enamel)
Thinner for epoxy primers
Thinner for all Sea-Line epoxy primers. It is very important to use paint thinners, which
Thinner for epoxy primers

Our FAQ answers to frequently asked questions

Possible causes

Too low temperature of ambitne,
Incorrect proportion of base and herdener,
Mixing two components from two different manufacturers

How to prevent

Apply the correct proportions of components
Maintain steady temperature (around 20ﹾC) during whole hardening process,
Mix the products thoroughly and bleed the mixture.

How to remove

The uncured mass requires complete removal from the surface.

It is not recommended to apply 2K paints over 1K paints. 1K and 2K inks differ in their composition and properties, including hardness, chemical resistance and durability. 1K paints are one-component and dry by evaporating the solvent, while 2K paints are two-component and need to be cured by adding a hardener. Applying 2K paint over 1K paint can cause unpredictable chemical reactions and lead to undesirable effects such as dulling, chipping or flaking of the paint. Therefore, always use paints according to the manufacturer’s instructions and do not mix different types of paints. farby zgodnie z instrukcjami producenta i nie mieszać różnych rodzajów farb.

If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.