Polymer

Is elastic sealant recommended for sealing and bonding various types of materials.

Color	Capacity	Code
White	200ml	300008208
Black	200ml	300008210
Transparent	200ml	300008211

Technical informations

Characteristics

resistance to UV and water (also salt water)
no need to priming
does not discolor surface (does not contain thinners and isocyanate)
can be covered by any type of paint

Application method

Thanks to this innovative application system, there is no need to use additional tools for applying Marine Polymer. Moreover, the system ensures consistent dosing force of the sealant throughout the entire application.

Product description "Polymer"

POLYMER is recomended for use on :

laminates polyester and epoxyd
gelcoat
steel (galvanized, aluminium, acid resistance)
glass
wood
varnished and primed surfaces
plexi, polycarbonate (without discoloration on surface)
various types of plastic except PE,PP,PTFE
concrete and mineral substrates (ie. gypsum)

Polymer - instructional video

Type	laminat, steel, wood, concret, plexi, etc.
Place	Above and below waterline
Function	sealing bonding
Chemical character	hybrid
Densinity	1,44 g/cm³
Curing mechanizm	apsorption of moisture from air
Elogation at break	to 500% (DIN 53 504)
Tensile strenght	3,0 N/mm² (DIN 53 504)
Tear resistance	20 N/mm
Resistant to temperatures	-40ºC to + 90ºC
Resistant to temperatures for short intervals	to +120ºC (white, black)
Resistant to temperatures for short intervals	to +100ºC (transparent)
Time for skin formation 20ºC	15 minut
Curing time 20ºC	24 h (weld to 3 mm)
Time to contact with water 20ºC	min. 30 minutes
Time to be painted 20ºC	3 day
Shrink	no

Apply on surfaces no need to priming.

Steel surfaces is recommend to prime using Epoxy Anticorrosion primer 4:1 Sea-Line.

Wood and concrete is recommend to prime using Epoxy Woodprimer 10:4 Sea-Line.
In case of application on natural wood, its humidity should be lower than 20%.

Clean surfaces from rust, damage paint coatings, etc. To increase adhesion, is recommend to sand surfaces by sand paper :

wood: P80~P120
laminate: P200~P400
steel: P80~P120
plastic (various types): P200~P400

Clean surfaces from dust and contamination.

Grease and salt remove using Cleaner Sea-Line®

Thanks to advance dispensing system, POLYMER does not require extra tools to application, provides exact thickness of weld during application.

Unlock nozzle
Unlock dosing regulator
Set dosing regulator accordance with the needs
Apply product by pressing lever
After finishing application, secure dosing nozzle and block dosing regulator

Also check

Parafina Sea-Line
Paraffin is an additive mainly to polyester gelcoats, necessary when it is necessary to apply
Parafina Sea-Line
Lamination – fiberglass and glassfabric
Fiberglass reinforcements, including boat mats and fiberglass fabrics combined with resin, are used for repairs
Lamination – fiberglass and glassfabric
Non Skid Powder
Non skid powder is anadditive for polyurethane topcoats. Non-slip powder = 20 grams, the amount
Non Skid Powder

Our FAQ answers to frequently asked questions

Sea-Line yacht paints are designed for painting the surface of boats and yachts made of various materials, e.g. laminate, wood or steel. We do not have a certificate of the National Institute of Hygiene, which would allow the use of yacht paint to paint the tank with drinking water.

There is a possibility of thinning antifouling, but we do not recommend this procedure due to the risk of reducing the effectiveness of the paint. If it is necessary to thin the antifouling paint, it is recommended to dilute it to a maximum of 0-5% (by volume).

We do not sell retail. Our products can be found in many stores in Poland and abroad. Our distributors run stationary and online stores. The full list of distributors and contacts can be found on our website at the following link click here.