Wyszukaj na stronie
Menu

Double Side Wool Sea-Line

Double-sided polishing wool is made from 100% natural wool. Ideal for removing scratches and mates on large surfaces. This is ideal tool for polishing gelcoats, PU topcoats and lacquers.

The diameter of the applicator – 220 mm, supplied complete with mounting adapter polishing machine.

SizeColorRecommended backing plateCode
∅ 220 mmwhiteKits included300006614
Double Side Wool Sea-Line
  • Cut level = 10

Basic information

RECOMMENDED POLISH PASTErecommendedoptional
  • S0
  • S05
  • S07
  • S1
  • S1 PREMIUM

You have questions about the product - Double Side Wool Sea-Line

    Also check

    Our FAQ answers to frequently asked questions

    Can I add some thinner to antifouling paint?

    There is a possibility of thinning antifouling, but we do not recommend this procedure due to the risk of reducing the effectiveness of the paint. If it is necessary to thin the antifouling paint, it is recommended to dilute it to a maximum of 0-5% (by volume).

    Why the epoxy filler does not harden?

    Possible causes

    • Incorrect proportion of base and herdener,
    • Too low temperature of ambient and surface (less than 10ﹾC),
    • Mixing two components from two different manufacturers,

    How to prevent

    • Apply the correct proportions of components
    • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
    • Use base and hardener from the same manufacturer

    How to remove

    • The uncured mass requires complete removal from the surface.

    Why did the polyurethane topcoat become dull?

    Possible causes

    • Too short time for evaporation of the thinner,

    How to prevent

    • Maintain the right conditions for complete evaporation of the thinner,

    How to remove

    • Mat the surface, degrease and apply the paint according to the rule (right conditions and thinning proportions)
    • Polish surface if needed.
    Wyjście
    Przeiń na górę