Metal can

Metal containers are used not only for production but also for storing painting materials.

Metal cans are safer and more resistant to mechanical damage than plastic containers.

Capacity	Code	Lid / stopper for the can
Can under the lid
0,25 L	500001132	500000408
0,5 L	500002490	500000428
1 L	500001039	500000428
Can under cork	Code	Can stopper
0,25 L	500001139	500000994
1 L	500001038	500001001
Gallon (3,75 L)	Code	Gallon lid
	500000180	500003543
Bucket	Code	Lid for the bucket
3 L	500001190	– with the lid
5 L	500001227	500004543
10 L	500001261	500005050
20 L	500001232	500005050
Canister under the cork	Code	Canister cap
2,5 L	500001910	500001001
5 L	500001911	500001001

Metal can

Also check

Plastic cups (buckets) with lid
Convenient containers for mixing and storing paints and lacquers, complete with lids.
Plastic cups (buckets) with lid
Plastic bottle pehd with cork
Handy bottles with scale and cork, for thinners, lacquers, hardeners, etc.
Plastic bottle pehd with cork
Touch up paint bottle
Product is a perfect solution for customers of paint mixing stations and paint workshop. Each
Touch up paint bottle

Our FAQ answers to frequently asked questions

Possible causes

Wrong surface preparation,
Skipping the primer in the system application process,
Use of universal thinners or replacements ,
Paint incompatibility.

How to prevent

Correct surface preparation (grinding, clearing, degreasing),
Use primers which improve adhesion of paints,
Use thinners which are dedicated to each paints,
Use of paints which are compatible to each other.

How to remove

Grind, clean and paint again.

Possible causes

Inaccurate surface cleaning before paint application,
Incorrect painting tools preparation (brush and roll),
Performing work in a place exposed to constant contact with dust.

How to prevent

Careful surface preparation (grinding, clearing, degreasing),
Careful painting tools preparation before use,
Maintain clean work environment

How to remove

Grind, clean and paint again.

Possible causes

Too low temperature of ambitne,
Incorrect proportion of base and herdener,
Mixing two components from two different manufacturers

How to prevent

Apply the correct proportions of components
Maintain steady temperature (around 20ﹾC) during whole hardening process,
Mix the products thoroughly and bleed the mixture.

How to remove

The uncured mass requires complete removal from the surface.