Linguaggio:

ISO 14001

Home » Bez kategorii » ISO 14001
Kosmetyki do naprawy łodzi oraz jachtów
ISO 14001

The aim of the norm ISO 14001 concerning environment management is helping organizations as far as the influence of their activity, goods and services on the environment is concerned. It also aims at the reduction of the influence on the environment and effective use of the available resources on each stage of the activity.The standard ISO 14001 does not include absolute requirements concerning environmental activity of a given company. It requires the organization to operate in accordance with provisions that it included in the environmental policy, to observe legal regulations, to identify environmental aspects on the basis of which the list of aspects with the specification of aspects significant in the company activity is created. On the basis of these aspects, the company should define its objectives, tasks and environmental programmes. The major and most important requirement of the standard is the company constant aiming at self-perfection

ISO 9001:2015

ISO 14001:2015

 


Condividi:

Vedi anche
Altre discussioni in questa categoria

Le nostre FAQ
Risposte alle domande più frequenti

Why does the paint have no adhesion?

Possible causes

  • Wrong surface preparation,
  • Skipping the primer in the system application process,
  • Use of universal thinners or replacements ,
  • Paint incompatibility.

How to prevent

  • Correct surface preparation (grinding, clearing, degreasing),
  • Use primers which improve adhesion of paints,
  • Use thinners which are dedicated to each paints,
  • Use of paints which are compatible to each other.

How to remove

  • Grind, clean and paint again.

Why the resin does not harden?

Possible causes

  • Too low temperature of ambitne,
  • Incorrect proportion of base and herdener,
  • Mixing two components from two different manufacturers

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during whole hardening process,
  • Mix the products thoroughly and bleed the mixture.

How to remove

  • The uncured mass requires complete removal from the surface.

Why are the streaks formed?

Possible causes

  • Wrong viscosity and spraying technique,
  • Failure to maintain proper evaporation time and thickness of layers,
  • Incorrect spraying pressure,
  • Too low temperature of varnish, surface or space ,
  • Wrong thinner or hardener.

How to prevent

  • Apply the right type of application method indicated by manufacturer,
  • Use working spray guns,
  • Both the object and material must have room temperature of 20ﹾC,
  • Apply correct proportion of base and hardener.

How to remove

  • Grinding and polishing,
  • Grinding and painting,
La nostra offerta
Familiarizzate con la nostra offerta di materiali e vernici per la costruzione di barche
Exit
Przewiń na górę