Wyszukaj na stronie

Cleaning set for your boat

Cleaning the boat – it can be simple. We would like to offer a practical set of cleaning products Sea-Line Brayt

Cleaning preparations:

  • C2 CONCENTRATE CLEANER – concentrate for stubborn dirt
  • C3 SHAMPOO WITH WAX – wax shampoo to clean the surface during the season
  • C4 TEAK CLEANAER – concentrate for cleaning and renewal of teak and other exotic wood

Preparations for protecting surface:

  • S4 PROTECT WAX – wax protective surfaces of GPR

Accessories to use:

  • MICROFIBRE CLOTH – 2 pieces of microfiber cloth
  • All packed in a 5-litre bucket – necessary to dilute the concentrated preparations

 

Cleaning set for your boat

More details :

Sea-Line® C2 CONCENTRATE CLEANER is a concentrated product for cleaning GPR off lingering contaminants. It is a very powerful biodegradable, water soluble cleaner for quick and efficient removal of contaminants from such surfaces as:

  • GRP laminate
  • varnished surfaces
  • aluminium (masts, fittings)
  • PCV (pontoons).
  • rubber (reflectors, rubbing strakes, gaskets).
  • textiles (tents, covers, tarpaulins).

Thin Sea-Line® C2 with water at a ratio of:

  • 1:5 for heavy contaminants
  • 1:10 for average contaminants

The modern formula of Sea-Line® C2 Concentrate Cleaner combined with a possibility of diluting the product, depending on the degree of contamination, makes it ideal for removing:

  • grease
  • oils (also hydraulic ones),
  • soot
  • discolorations and damp patches caused by rainfalls
  • other contaminants difficult to remove

Using a sponge or a brush, apply C2 Concentrate Cleaner. Removed contaminants and the product residues, rinse abundantly with water. Do not let contaminants dry out on the cleaned surface.

Sea-Line® C3 SHAMPOO WITH WAX is a shampoo with wax for cleaning and protecting gelcoat and painted surfaces. High cleaning power and finish in gloss.

Shake well before use.  Let a small amount dissolve in warm water and clean the vessel. After treatment, always rinse with fresh water. Polish with a dry, soft cloth to retrieve a high gloss shine.

Sea-Line® C4 TEAK CLEANER is biodegradable, water-soluble product for quick and efficient cleaning of teak wood, exotic wood and other kinds of wood. C4 Teak restores the colour and leaves no residues difficult to remove. The product is safe for sealants and adhesives during the wood cleaning.

Thin Sea-Line C4 Teak Cleaner with water at a ratio of:

  • *1:10 for heavy contaminants
  • *1:20 for average contaminants

Before you start cleaning, soak the surface thoroughly and let it absorb water. .Using a soft brush, remove contaminants moving along the growth rings. Removed contaminants and the product residues, rinse abundantly with water. Do not let contaminants dry out on the cleaned surface.

After drying, wood can be secured with teak oil.

Sea-Line® S4 PROTECT WAX

Perfect gloss with lasting effect and protective cover. Reduces the adhesion of dirt. Suitable for gelcoat and painted surfaces. Sea-Line® S4 PROTECT WAX formula does not leave streaks on the surface and does not damage the components made of plastic. This modern wax protects the surface against UV rays and settling of dirt, at the same time giving it a perfect and very high gloss.

It is recommended to use Sea-Line ® S4 PROTECT WAX especially a surface which, after the polishing process requires additional security and protection against UV rays. It was created by Sea-Line ® S4 PROTECT WAX protective coating remains on the surface for a long period of time.

The surface must be clean and dry. Apply in a thin layer and rub with a soft microfiber cloth.

Before using Sea-Line® S4 PROTECT WAX is recommended to wash the surface using one of the specialized formulations for cleaning and washing:

  • Sea-Line® C1 SUPER STRONG (shell and fouling remover)
  • Sea-Line® C2 CLEANER CONCENTRATE

Also check

Our FAQ answers to frequently asked questions

Why the epoxy filler does not harden?

Possible causes

  • Incorrect proportion of base and herdener,
  • Too low temperature of ambient and surface (less than 10ﹾC),
  • Mixing two components from two different manufacturers,

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
  • Use base and hardener from the same manufacturer

How to remove

  • The uncured mass requires complete removal from the surface.

Can I use universal thinner?

We do not recommend using universal thinners. The use of a thinner with an unknown composition may result in loss of adhesion, lack of proper flow of paint and varnish defects.

Why are the streaks formed?

Possible causes

  • Wrong viscosity and spraying technique,
  • Failure to maintain proper evaporation time and thickness of layers,
  • Incorrect spraying pressure,
  • Too low temperature of varnish, surface or space ,
  • Wrong thinner or hardener.

How to prevent

  • Apply the right type of application method indicated by manufacturer,
  • Use working spray guns,
  • Both the object and material must have room temperature of 20ﹾC,
  • Apply correct proportion of base and hardener.

How to remove

  • Grinding and polishing,
  • Grinding and painting,
Wyjście
Przeiń na górę