Wyszukaj na stronie
Menu

Forbes Diamonds 2022

The editors of the “Forbes” magazine, in cooperation with Dun & Bradstreet Poland, have prepared a list of the most dynamically developing companies in Poland. Our company, as well as all the companies on this list, can be proud of the title of “Forbes Diamonds 2022”

During the ceremonial gala in Szczecin, Forbes Diamonds 2022 were awarded to the distinguished winners from the West Pomeranian Voivodeship. Karol Duda received the award on our behalf. During the gala, discussions were held about what the current economy looks like and how it will change, and the debate “How to develop a business in a turbulent environment. New pillars of security “.

Forbes Diamonds 2022

Also check

Our FAQ answers to frequently asked questions

Why does the paint have no adhesion?

Possible causes

  • Wrong surface preparation,
  • Skipping the primer in the system application process,
  • Use of universal thinners or replacements ,
  • Paint incompatibility.

How to prevent

  • Correct surface preparation (grinding, clearing, degreasing),
  • Use primers which improve adhesion of paints,
  • Use thinners which are dedicated to each paints,
  • Use of paints which are compatible to each other.

How to remove

  • Grind, clean and paint again.

Why despite the use of antifouing paint the bottom of the boat is overgrown?

Possible causes

  • Too thin layer of antifouling paint,
  • Choosing the wrong antifouling to type of a boat or yacht
  • Thinning of antifouling paint,
  • Incorrect surface preparation before antifouling application.

How to prevent

  • Apply the right layer thickness of paint indicated by manufacturer,
  • Choose antifouling dedicated to type of boat or yacht and suitable for the type of water,
  • Do not thin antifouling because of the risk of reducing effectiveness,
  • Careful surface preparations (grinding, clearing, degreasing),

How to remove

  • Wet grinding, apply new layers of antifouling paint.
  • Use C1 shell and fouling remover.

Why the epoxy filler does not harden?

Possible causes

  • Incorrect proportion of base and herdener,
  • Too low temperature of ambient and surface (less than 10ﹾC),
  • Mixing two components from two different manufacturers,

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
  • Use base and hardener from the same manufacturer

How to remove

  • The uncured mass requires complete removal from the surface.
Wyjście
Przeiń na górę