Wyszukaj na stronie
Menu

Fouling Stop Seaguard

It does not contain any active substances, such as toxic biocides.

ColorCapacityCode
white750 ml / 2,5 l300009843 / 300009847
dark blue750 ml / 2,5 l300009836 / 300009846
black750 ml / 2,5 l300011250 / 300011251
Fouling Stop Seaguard

Technical informations

Color

Exposure of a freshly applied antifouling paint to moist air can lead to color change. The discoloration is only superficial and does not affect the effectiveness of the antifouling paint.

Application method

Manually:

  • brush
  • roller

Spray:

  • pneumatic spray

Product description "Fouling Stop Seaguard"

  • SEAGUARD does not contain active ingredients, i.e. toxic biocides.
  • The bottom paint is much more environmentally friendly, which is significant especially in the case of such reservoirs as lakes.
  • Recommended for lakes.
  • Modern solutions were applied in producing this paint which allowed to create a coating which will make it more difficult for lichens to maintain and develop on a surface.
  • Works best for units moving with the speed not higher than of 30 knots and which are used often.
  • It’s a self-polishing paint which is an extra benefit for users.
  • It can be used for all types of yachts and boats – laminate, wood, steel and aluminium.
  • Available containers: 0,75 l and 2,5 l
  • Available colors: navy blue and white
  • can safely be applied with roll, brush and air spray gun
  • high capability – up to 10m2 out of 1 litre.
  • Is compatible with the majority of available anti-fouling products
  • The product was designed in view of the countries where anti-fouling paints containing biocides are forbidden and recalled.
  • We recommend to use primer coat. For example  Epoxy Lightprimer 5:1 Sea-Line,  Epoxy Primer 5:1 Sea-Line, Woodprimer 10:4, Universal primer 1K.

Basic information

TypeGRP laminates, wood, Steel, aluminium
PlaceBelow waterline
FunctionAntifouling paint discourages the growth
of barnacles, weed, and other water life on the
submersed hull of the boat.
Applicationbrush, roll, spray gun
Thinning *No
Theoretical coverage For 1l9÷10 m2 for 100 μmWFT/ 50 μm DFT
Coats number1 – 3
Time between layersMin 5 h
Dry to launch:Min 12 h – max 30 day

You have questions about the product - Fouling Stop Seaguard

    Thinning notice:

    In the case of high temperatures and the need to thin the antifouling paint, a maximum dilution of 0-5% (by volume) is recommended.
    Dilution and the application method directly affect the thickness of the antifouling paint layer.

    Special attention should be paid to obtaining a specific coating thickness (100 μm DTF), which ensures the effective operation of the antifouling paint.

    Also check

    Our FAQ answers to frequently asked questions

    Why the epoxy filler does not harden?

    Possible causes

    • Incorrect proportion of base and herdener,
    • Too low temperature of ambient and surface (less than 10ﹾC),
    • Mixing two components from two different manufacturers,

    How to prevent

    • Apply the correct proportions of components
    • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
    • Use base and hardener from the same manufacturer

    How to remove

    • The uncured mass requires complete removal from the surface.

    Can I use yacht paints for a drinking water tank?

    Sea-Line yacht paints are designed for painting the surface of boats and yachts made of various materials, e.g. laminate, wood or steel. We do not have a certificate of the National Institute of Hygiene, which would allow the use of yacht paint to paint the tank with drinking water.

    Do you have to paint the scratched side of the boat?

    If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.

    Wyjście
    Przeiń na górę