Wyszukaj na stronie
Menu

C3 Shampoo With Wax

C3 SHAMPOO WITH WAX is a shampoo with wax for cleaning and protecting gelcoat and painted surfaces. High cleaning power and finish in gloss.

Shake well before use. Let a small amount dissolve in warm water and clean the vessel. After treatment, always rinse with fresh water. Polish with a dry, soft cloth to retrieve a high gloss shine.

CapacityCode
250 ml300006980
C3 Shampoo With Wax

Technical informations

Color

  • milky

Application method

Manually:

  • soft brush
  • cloth

Product description "C3 Shampoo With Wax"

The wax in Sea-Line® C3 SHAMPOO WITH WAX does not damage plastic components.

Consistency:

  • Thick liquid

Odour:

  • Citric

Solubility in water:

  • 100%

C3 Shampoo With Wax - instructional video

Surface preparation

  • Clean the surface with water to remove sand and stones.
  • Shake the container containing C3 shampoo with wax before use.
  • Dissolve a small amount of the product in lukewarm water.
  • Wash the surface thoroughly to remove any dirt.
  • Rinse thoroughly with water to remove any shampoo residue.

Further work:

  • To achieve a higher shine, polish the surface by hand (with a soft cloth) after it dries.
  • If necessary, the surface can be additionally protected with wax.

You have questions about the product - C3 Shampoo With Wax

    Also check

    Our FAQ answers to frequently asked questions

    Can I paint the bottom of the boat with polyurethane paint?

    Yes, you can paint the bottom of the boat with polyurethane paint due to its high mechanical strength. We recommend this solution when the boat is not launched for a long time and is not exposed to fouling.

    Why the resin does not harden?

    Possible causes

    • Too low temperature of ambitne,
    • Incorrect proportion of base and herdener,
    • Mixing two components from two different manufacturers

    How to prevent

    • Apply the correct proportions of components
    • Maintain steady temperature (around 20ﹾC) during whole hardening process,
    • Mix the products thoroughly and bleed the mixture.

    How to remove

    • The uncured mass requires complete removal from the surface.

    Why the paint does not have the right flow?

    Possible causes

    • No thinning, wrong thinner or wrong amount of thinner
    • Wrong type of roll or brush (wrong bristle lenght)
    • Applying too much or too Little paint,
    • During painting process temperature was too high or the air was too dry,
    • Incorrect preparation of too porous surface,
    • Incorrect proportion of thinner.

    How to prevent

    • Use a brush/Toller suited to the type of surface or paint,
    • Use thinner which is dedicated to the type of application and paints
    • Use thinning proportions which was indicated by manufacturer,
    • Paint in right atmosphere conditions indicated by manufacturer,

    How to remove

    • Grind, clean and paint again.
    Wyjście
    Przeiń na górę