Color renovation

Color Renovation C5 is a silicone-free product that effectively restores the original appearance of colors on the following surfaces:

gelcoat (laminate)
polyurethane and other types of paints
plastic
metal (chrome, brass, steel, stainless steel, aluminum, bronze)
stone (including marble, terracotta, tiles).

Capacity	Code
500 ml	300007599

Technical informations

Color

amber (transparent)

Application method

Manually:

brush
microfiber cloth
scrub brush

Product description "Color renovation"

COLOR RENOVATION is a product which does not contain silicon and efficiently brings back an original appearance of colours
Recommended for using on surface made of gelcoat (laminate), polyurethane varnishes, plastic, metal (chrome, brass, stainless steel, aluminum, bronze) and stone (including marble, terracotta, tiles).
products deeply penetrates the surface, bringing back the colour and gloss lost as a result of atmospheric conditions (UV rays and rain)
Using COLOR RENOVATION restores the appearance of mat and chalk paints
Creates a protective layer on the laminate or paint surface or paints
COLOR RENOVATION protects steel against corrosion
Easy in use

Application process:

Surface Preparation: Initially remove waxes and polishers from the surface. Then thoroughly wash the surface using C2 Concentrate Cleaner Sea-Line®. It is important to note that the surface must be dry, meaning it should not come into contact with water, mist, or settling dew for a minimum of 12 hours before starting the application. As mentioned at the beginning, white surfaces should be protected from accidental contact with the COLOR RENOVATION Sea-Line® product.
Application process: Apply an even layer of C5 COLOR RENOVATION Sea-Line® onto the surface using a microfiber cloth, brush, or scrub brush. Apply only the amount of product that can be worked in within 20 minutes. Leave it on the surface for about 20 minutes to be absorbed into the substrate. Then, remove any excess product from the surface. Allow it to dry.
Finishing work: After 24 hours, to enhance the gloss of the surface, you can also polish it using a microfiber cloth. To remove defects and mechanical damage, you can also polish the renewed surface using polishing systems – S1 Sea-Line® polishing paste or S2 Sea-Line® polishing milk. Additionally, it is recommended to provide additional protection to the surface by using protective wax S4 Protect Wax or Quick Wax S5 Sea-Line®.

Before use

Przed uzyciem

After use

Po uzyciu

Also check

C1 Bottom Cleaner
C1 BOTTOM CLEANER is a powerful, effective formula to rapidly remove dirt, rests of shells
C1 Bottom Cleaner
C2 Concentrate Cleaner
Very powerful water soluble and biodegradable cleaner for quick and efficient removal of oil, grease,
C2 Concentrate Cleaner
C3 Shampoo With Wax
C3 SHAMPOO WITH WAX is a shampoo with wax for cleaning and protecting gelcoat and
C3 Shampoo With Wax

Our FAQ answers to frequently asked questions

It is not recommended to apply 2K paints over 1K paints. 1K and 2K inks differ in their composition and properties, including hardness, chemical resistance and durability. 1K paints are one-component and dry by evaporating the solvent, while 2K paints are two-component and need to be cured by adding a hardener. Applying 2K paint over 1K paint can cause unpredictable chemical reactions and lead to undesirable effects such as dulling, chipping or flaking of the paint. Therefore, always use paints according to the manufacturer’s instructions and do not mix different types of paints. farby zgodnie z instrukcjami producenta i nie mieszać różnych rodzajów farb.

We do not recommend using universal thinners. The use of a thinner with an unknown composition may result in loss of adhesion, lack of proper flow of paint and varnish defects.

If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.