Wyszukaj na stronie

Polisher Backing Plate

Mounting of polishing heads made of lamb’s wool type MM Ø80 for polishing indentations or details requiring a precise applicator.

SizeColorRecommended for padsCode
∅ 50 mmyellowØ80300006616
Polisher Backing Plate

You have questions about the product - Polisher Backing Plate

    Also check

    Our FAQ answers to frequently asked questions

    Can I add more hardener to speed up the reaction?

    Do not add more hardener, because after the base has cured, the remaining hardener will react with subsequent layers, which will be applied to the surface and cause defects. For the product to work properly, please follow the proportions given by the manufacturer.

    Can I paint the bottom of the boat with polyurethane paint?

    Yes, you can paint the bottom of the boat with polyurethane paint due to its high mechanical strength. We recommend this solution when the boat is not launched for a long time and is not exposed to fouling.

    Why the epoxy filler does not harden?

    Possible causes

    • Incorrect proportion of base and herdener,
    • Too low temperature of ambient and surface (less than 10ﹾC),
    • Mixing two components from two different manufacturers,

    How to prevent

    • Apply the correct proportions of components
    • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
    • Use base and hardener from the same manufacturer

    How to remove

    • The uncured mass requires complete removal from the surface.
    Wyjście
    Przeiń na górę