S0 polishing compound Sea-Line is a polishing paste is designed for professionals – manufacturers, shipyards and products where it forms the outer layer of the technical gelcoat or industrial topcoat with a high hardness.
| Weight | Code |
|---|---|
| 1 kg | 11246 |
No silicone
S0 polishing compound removes imperfections after sanding grit sandpaper, even P800 (depending on the hardness of the surface). The paste is designed to work with with machines with a maximum rotation speed of 2000.
Best when applied with wool and hard sponges.
| Surfaces | gelcoat, polyurethane paints and varnishes, | |||
| Function | removing defects from the surface gloss restoring | |||
| Consistency | paste | |||
| Surface preparation * | mechanical grinding | manual grinding | ||
| light color | dark color | light color | light color | |
| gelcoat | P800 ⇒ | P1200 ⇒ | P1200 ⇒ | P1500 ⇒ |
| polyurethane paint | P1200 ⇒ | P1500 ⇒ | P1200 ⇒ | P1500 ⇒ |
| hign hardness surfaces | P1200 ⇒ | P1500 ⇒ | P1500 ⇒ | P2000 ⇒ |
* grinding paper minimal gradation
Clean the surface destined for polishing. If removing defects is necessary, polish the surface with sandpaper of the following gradation preliminary polishing: <P500
Polish the surface with sandpaper of final gradation : P800 →
Dark colours or hard surfaces polish the surface with sandpaper of final gradation : P1200 →
Clean the surface, apply the compound onto an element or head (wool or tough sponge)
Apply the compound at minimum rotations on the whole surface that is being polished (800-1000 rotations/min) polishing until it changes colour and the compound changes its texture
Slowly increase the speed max. to 1800 RPM working with a little pressure
Clean the surface.
Polishing systems meet all stages of production, as well as during repair work, renovations or
Primarily designed for the companies which produce goods or forms made of gelcoat or an
S07 Heavy Cut Sea-Line is specialistic polishing paste with a very high cutting force which
Sea-Line® S05 polishing compound is a one-stage compound with a high cutting force which guarantees
Do not add more hardener, because after the base has cured, the remaining hardener will react with subsequent layers, which will be applied to the surface and cause defects. For the product to work properly, please follow the proportions given by the manufacturer.
Troton Sp z o.o.
78-120 Gościno
Ząbrowo 14A
Polska
Sąd Rejonowy w Koszalinie IX Wydz. KRS 0000187692;
Kapitał zakładowy 8 215 000 PLN
Facebook
YouTube
Instagram
Guide
Contact
Newsletter