Wyszukaj na stronie

S2 Extra Shine Hologram Remover

Sea-Line® S2 finishing compound is universal for all types of finishing coatings.

WeightCode
500 g300005581
S2 Extra Shine Hologram Remover
  • Cut level = 2
  • Gloss level= 10

No silicone

Color

  • Light blue

Application method

  • Rotary machine
  • Orbital machine

Product description "S2 Extra Shine Hologram Remover"

Eliminates defects after polishing and provides a perfect mirror finish. High quality minerals provide immaculate polishing, a mirror finish without holograms, and the optimal proportion of solids and a binder keeps your work area clean and makes the residual product easy to remove. Does not contain silicone.

S2 Extra Shine Hologram Remover - instructional video

Basic information

For surfaceGelcoat, topcoat, composites, poliuretan paints.
Functionfinishing compound without scratching
removes marks, swirls and holograms
gives a high shine finish with good depth and clarity
Type of damageScratches on dark colors
ApplicationHand or machine
Recommended applicatorLamb wool,
soft sponge

You have questions about the product - S2 Extra Shine Hologram Remover

    Related articles

    Also check

    Our FAQ answers to frequently asked questions

    Why the resin does not harden?

    Possible causes

    • Too low temperature of ambitne,
    • Incorrect proportion of base and herdener,
    • Mixing two components from two different manufacturers

    How to prevent

    • Apply the correct proportions of components
    • Maintain steady temperature (around 20ﹾC) during whole hardening process,
    • Mix the products thoroughly and bleed the mixture.

    How to remove

    • The uncured mass requires complete removal from the surface.

    Why the epoxy filler does not harden?

    Possible causes

    • Incorrect proportion of base and herdener,
    • Too low temperature of ambient and surface (less than 10ﹾC),
    • Mixing two components from two different manufacturers,

    How to prevent

    • Apply the correct proportions of components
    • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
    • Use base and hardener from the same manufacturer

    How to remove

    • The uncured mass requires complete removal from the surface.

    Do you have to paint the scratched side of the boat?

    If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.

    Wyjście
    Przeiń na górę