Wyszukaj na stronie

S4 Protect Wax

Perfect gloss with lasting effect and protective cover. Reduces the adhesion of dirt. Suitable for gelcoat and painted surfaces.

CapacityCode
250 ml300006977
S4 Protect Wax

Color

  • White (after use transparent)

Application method

The surface must be clean and dry. Apply in a thin layer and rub with a soft microfiber cloth.

Product description "S4 Protect Wax"

Sea-Line® S4 PROTECTIVE WAX is an excellent gloss and long-lasting protective layer.

Sea-Line® S4 protective wax reduces the adhesion of dirt to the surface, creating a protective hydrophobic layer. It is recommended for laminate and painted surfaces, protecting them from UV radiation.

Apply Sea-Line® S4 protective wax with a soft cloth, evenly and thinly spread the wax over the entire surface. Sea-Line® S4 protective wax does not leave streaks or discoloration.

The S4 protective wax can be additionally polished by hand or mechanically to achieve a higher surface gloss.

Surface preparation

To prevent accidental removal of the protective layer created using Sea-Line® S4 PROTECTIVE WAX by overly aggressive products, it is recommended to use for regular washing and cleaning of surfaces:

  • Sea-Line® C3 SHAMPOO WITH WAX

Details of the application method

  • Sposób aplikacji - S4 Protect Wax

    Using a microfiber cloth, wipe the applied layer of wax until the wax is completely buffed on the surface.

  • Sposób aplikacji - S4 Protect Wax

    For a higher level of gloss, it is recommended to polish the surface using a microfiber cloth, a mechanical polisher, or a soft sponge.

You have questions about the product - S4 Protect Wax

    Related articles

    Also check

    Our FAQ answers to frequently asked questions

    Can I use selfpolishing Sea-Line and HARD Sea-Line antifoulings on aluminium boat?

    Sea-Line HARD and Sea-Line self-polishing antifouling are not intended for aluminum surfaces. They include copper oxide, which in contact with aluminum causes galvanic corrosion. Especially on aluminum, we offer ALU-PLUS self-polishing anti-fouling paint, which, in addition to excellent adhesion to aluminum, is also 30% more effective than traditional anti-fouling paints.

    Why the resin does not harden?

    Possible causes

    • Too low temperature of ambitne,
    • Incorrect proportion of base and herdener,
    • Mixing two components from two different manufacturers

    How to prevent

    • Apply the correct proportions of components
    • Maintain steady temperature (around 20ﹾC) during whole hardening process,
    • Mix the products thoroughly and bleed the mixture.

    How to remove

    • The uncured mass requires complete removal from the surface.

    Do you have to paint the scratched side of the boat?

    If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.

    Wyjście
    Przeiń na górę