Wyszukaj na stronie

S5 Quick Wax

Sea-Line Brayt S5 it is quick and easy in use product on base wax, recommended for every smooth and gloss surfaces (laminate, varnish and glass). After use S5 QUICK WAX we get color depth and gloss. Has an excellent hydrophobic and maintenance properties.

Does not leave streaks on the plastics and rubber surfaces. Sea-Line S5 Quick Wax is a product which is recommended after polishing surfaces with Sea-Line polishing compounds.

Wax can be used on surfaces exposed on sunlight. Does not leave streaks.

CapacityCode
500 ml12193
S5 Quick Wax

Color

  • White (after use – transparent)

Application method

  • hand (atomizer in set)

Product description "S5 Quick Wax"

Wash the surface before use Sea-Line® S5 QUICK WAX:

  • Sea-Line® C1 BOTTOM CLEANER (shell and fouling remover)
  • Sea-Line® C2 CONCENTRATE CLEANER
  • Sea-Line® S3 SHAMPOO WITH WAX

Basic information

Typelaminates (gelcoat)
glass
varnished surfaces
plexi, polycarbonate
FunctionUV protection

Reduces the adhesion of dirt

hydrofobic

Textureliquid

Surface preparation

For daily cleaning of surfaces from dirt, use cleaning agents that are safe for wax protective layers:

  • Sea-Line® C3 SHAMPOO WITH WAX

You have questions about the product - S5 Quick Wax

    Use:

    • Before applying the wax, make sure that surface is clean and dry.
    • Spray S5 QUICK WAX on the surface. Apply only such an amount of product which can be spread on the surfaces before its dry.
    • Spread wax on the surface using microfiber cloth.
    • Wipe surfaces with a new microfiber cloth. To increase gloss we can use polishing machine with soft heads.

    Related articles

    Also check

    Our FAQ answers to frequently asked questions

    Is it necessary to always sand the surface between application of two different products?

    We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.

    Why the epoxy filler does not harden?

    Possible causes

    • Incorrect proportion of base and herdener,
    • Too low temperature of ambient and surface (less than 10ﹾC),
    • Mixing two components from two different manufacturers,

    How to prevent

    • Apply the correct proportions of components
    • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
    • Use base and hardener from the same manufacturer

    How to remove

    • The uncured mass requires complete removal from the surface.

    Can I mix polyurethane paints to get a different color?

    Yes, you can mix Sea-Line polyurethane paints. The only difference are the pigments of polyurethane paints that determine the color of the paint. But remember to keep the right proportions of base, hardener and thinner.

    Wyjście
    Przeiń na górę