Wyszukaj na stronie

Brush Roll Thinner For Polyurethan

Brush and roll thinner for polyurethane color and high gloss polyurethane clear coat. Thinner for the application of brush and roll polyurethane topcoats — colored and colorless.

It is very important to use paint thinners, which provide the appropriate parameters of paint – flow, potlife, time of drying.

PojemnośćKod
250 ml7115
1 l5746
Brush Roll Thinner For Polyurethan

Application method

  • Brush / Roll

Product description "Brush Roll Thinner For Polyurethan"

The use of the appropriate thinner recommended by the manufacturer not only ensures proper technical parameters during application but also satisfactory final results.

Thinner for polyurethane paints is a mixture of carefully selected solvents, and its use allows obtaining a product with strictly defined parameters. Brushthinner 2K PU provides proper comfort during application and the correct curing time of the paint when applied with a brush and roller. The thinner ensures the preservation of properties and parameters such as flowability, working time, and curing speed.

Basic information

Color :RAL
White____20–25%
Light ivory101520–25%
Ruby red300315-20%
Sapphire blue500315-20%
Sky blu501520-25%
Mint green602915–20%
Squirrel grey700015–20%
Jet black900515–20%
High Gloss PRIMER functionx15-20 %
High Gloss TOPCOAT functionx0-5 %

You have questions about the product - Brush Roll Thinner For Polyurethan

    Also check

    Our FAQ answers to frequently asked questions

    Can I mix polyurethane paints to get a different color?

    Yes, you can mix Sea-Line polyurethane paints. The only difference are the pigments of polyurethane paints that determine the color of the paint. But remember to keep the right proportions of base, hardener and thinner.

    Can I purchase products directly from you?

    We do not sell retail. Our products can be found in many stores in Poland and abroad. Our distributors run stationary and online stores. The full list of distributors and contacts can be found on our website at the following link click here.

    Why the resin does not harden?

    Possible causes

    • Too low temperature of ambitne,
    • Incorrect proportion of base and herdener,
    • Mixing two components from two different manufacturers

    How to prevent

    • Apply the correct proportions of components
    • Maintain steady temperature (around 20ﹾC) during whole hardening process,
    • Mix the products thoroughly and bleed the mixture.

    How to remove

    • The uncured mass requires complete removal from the surface.
    Wyjście
    Przeiń na górę