Gelcoat based on IZO/NPG resin, thanks to which it achieves good resistance to weather conditions and high mechanical properties. Primarily recommended for repairing minor scratches and for the production of laminate products. The product is delivered without hardener, you need Metox 30. The gelcoat and the catalyst should be mixed gently.
It is a gelcoat in RAL 9010 color for versatile use:
Surface | laminat, | |
Place | above and below water line | |
Function | laminating, small repairs | |
Number of Coats | according need | |
Pot Life | 15-25 min in temperature 20°C | |
Hardening time | 24 h in temperature around 20°C | |
Color | white RAL 9010 |
White RAL 9010 no. SAP 300010262 capacity 1kg,
White RAL 9010 no. SAP 300010263 capacity 250g
METOX 30 no. SAP 300010282 capacity 20 ml
Paraffin corrector, e.g. SAP 300010264, capacity 60 ml
Manually: brush
First of all, the surface should be degreased and sanded with sandpaper. Remove dust and degrease again.
Mix the base with the hardener in a ratio of 100:3. The gelling time, the so-called potlife, i.e. the possibility of use after mixing the components, is approximately 15-25 minutes at a temperature of approximately 20°C.
TDS Technical Data Sheet
SDS – PRODUCT
SDS – SDS
une résine polyester de construction, conseillée pour le laminage, le renforcement des surfaces, l’obturation des orifi ces et des endommagements […]
PRODUCT DISCRIPTION : NEW Gelcoat Filler is very fast hard and easy in use. Hardener is a paste Recommended for […]
La résine époxy (epoxy resin) est une résine de construction Sea-Line® avec des applications multiples: elle peut être utilisée aussi […]
Is elastic sealant recommended for sealing and bonding various types of materials. PRODUCT DISCRIPTION: POLYMER is recomended for use on […]
We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.
Yes, you can paint the bottom of the boat with polyurethane paint due to its high mechanical strength. We recommend this solution when the boat is not launched for a long time and is not exposed to fouling.
We do not sell retail. Our products can be found in many stores in Poland and abroad. Our distributors run stationary and online stores. The full list of distributors and contacts can be found on our website at the following link click here.
Le produit destiné au remplissage des lacunes et à la liquidation des inégalités résultant des dommages ou des inégalités qui […]
La protection de la surface du bateau contre l’influence destructrice de l’osmose et de la corrosion dans des conditions difficiles
La protection contre l’eau et contre l’influence néfaste des rayons UV
La protection du fond du bateau contre l’encrassement par les algues et contre les coquillages. La protection contre l’eau
Une élimination efficace des fissures, le rafraîchissement de la couleur et du brillant du gel coat ou du vernis
Préparations spéciales pour le nettoyage et la remise en vigueur
Laminage, collage et de remplissage des fissures dans gelcoat
Beaucoup de produits utiles pour les travaux de construction d’un bateau