Linguaggio:

PRODOTTI – PRIMER EPOSSIDICI, 1K PRIMER

Home » Scaricare » PRODOTTI – PRIMER EPOSSIDICI, 1K PRIMER
Zabezpieczenie łodzi
NOME DEL FILESCARICARE
TDSSDS
PRODOTTOCATALIZZATORE
(comp. A)(comp. B)
EPOXY LIGHTPRIMER 5:1 (multifunzione)downloadscaricarescaricare
EPOXY PRIMER HS 3:2 (prevenzione osmosi)downloadscaricarescaricare
EPOXY PRIMER 4:1 (anticorrosione)downloadscaricarescaricare
THINNER for epoxy primers (diluente)XscaricareX
EPOXY PRIMER SPRAY (2K)downloadscaricareX
UNIVERSAL YACHTPRIMER 1KdownloadscaricareX
THINNER 1K (for primer, varnish, enamel)XscaricareX

Le nostre FAQ
Risposte alle domande più frequenti

Why are the streaks formed?

Possible causes

  • Wrong viscosity and spraying technique,
  • Failure to maintain proper evaporation time and thickness of layers,
  • Incorrect spraying pressure,
  • Too low temperature of varnish, surface or space ,
  • Wrong thinner or hardener.

How to prevent

  • Apply the right type of application method indicated by manufacturer,
  • Use working spray guns,
  • Both the object and material must have room temperature of 20ﹾC,
  • Apply correct proportion of base and hardener.

How to remove

  • Grinding and polishing,
  • Grinding and painting,

Can I paint the bottom of the boat with polyurethane paint?

Yes, you can paint the bottom of the boat with polyurethane paint due to its high mechanical strength. We recommend this solution when the boat is not launched for a long time and is not exposed to fouling.

Is it necessary to always sand the surface between application of two different products?

We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.

La nostra offerta
Familiarizzate con la nostra offerta di materiali e vernici per la costruzione di barche
Exit
Przewiń na górę