Langue:

Mastics – époxydiques et polyesters

Accueil » Télécharger » Mastics – époxydiques et polyesters
Farby szkutnicze
TÉLÉCHARGER
TDSSDS
PRODUITDURCISSEUR
(comp. A)(comp. B)
MASTIC ÉPOXYDIQUE
EPOXY FILLER UNIVERSALtéléchargertéléchargertélécharger
EPOXY FILLER LIGHTWEIGHT (léger)téléchargertéléchargertélécharger
EPOXY FILLER FIBREGLASS (avec fibre de verre)téléchargertéléchargertélécharger
MASTIC POLYESTER
POLYESTER FILLER UNIVERSALtéléchargertéléchargertélécharger
POLYESTER FILLER UNIVERSAL (styrene low)downloadtéléchargertélécharger
POLYESTER FILLER LIGHTWEIGHT (léger)téléchargertéléchargertélécharger
POLYESTER FILLER FIBREGLASS (avec fibre de verre)téléchargertéléchargertélécharger
POLYESTER FILLER FIBREGLASS (styrene low)downloadtéléchargertélécharger
POLYESTER FILLER MODELLING (de moulage)téléchargertéléchargertélécharger
POLYESTER SPRAY FILLER (pulvériser)téléchargertéléchargerdownload
THINNER FOR POLYESTER SPRAY FILLER (diulant)XtéléchargerX

Notre FAQ
Réponses aux questions fréquemment posées

Why the epoxy filler does not harden?

Possible causes

  • Incorrect proportion of base and herdener,
  • Too low temperature of ambient and surface (less than 10ﹾC),
  • Mixing two components from two different manufacturers,

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
  • Use base and hardener from the same manufacturer

How to remove

  • The uncured mass requires complete removal from the surface.

Why despite the use of antifouing paint the bottom of the boat is overgrown?

Possible causes

  • Too thin layer of antifouling paint,
  • Choosing the wrong antifouling to type of a boat or yacht
  • Thinning of antifouling paint,
  • Incorrect surface preparation before antifouling application.

How to prevent

  • Apply the right layer thickness of paint indicated by manufacturer,
  • Choose antifouling dedicated to type of boat or yacht and suitable for the type of water,
  • Do not thin antifouling because of the risk of reducing effectiveness,
  • Careful surface preparations (grinding, clearing, degreasing),

How to remove

  • Wet grinding, apply new layers of antifouling paint.
  • Use C1 shell and fouling remover.

Contamination in topcoat paint?

Possible causes

  • Inaccurate surface cleaning before paint application,
  • Incorrect painting tools preparation (brush and roll),
  • Performing work in a place exposed to constant contact with dust.

How to prevent

  • Careful surface preparation (grinding, clearing, degreasing),
  • Careful painting tools preparation before use,
  • Maintain clean work environment

How to remove

  • Grind, clean and paint again.
Notre offre
Familiarisez-vous avec notre offre de matériaux et de peintures pour la construction de bateaux
Exit
Przewiń na górę