Linguaggio:

Modernization of the electrical network

Home » Notizie » Modernization of the electrical network
Farby dla jachtów
Modernization of the electrical network

On Monday, October 18, 2021 and Friday, October 22, 2021, modernization works of the electrical network will be carried out in the area where our headquarters is located. This work will result in electric power cuts. Due to the above, on these days, the execution of orders will be postponed to the next day. Please plan your orders keeping in mind the possible longer realisation time.

Communication by email and office phones may be limited. In urgent cases, please contact us at the following telephone numbers:

Sławek Kukielewski phone: +48 604 821 461

Marta Wieder-Pokorska phone: +48 604 807 476

Karol Szkutnik tel: +48 602 712 435

We apologize for the inconvenience and we ask for your understanding.


Condividi:

Vedi anche
Altre discussioni in questa categoria

Le nostre FAQ
Risposte alle domande più frequenti

Why did the polyurethane topcoat become dull?

Possible causes

  • Too short time for evaporation of the thinner,

How to prevent

  • Maintain the right conditions for complete evaporation of the thinner,

How to remove

  • Mat the surface, degrease and apply the paint according to the rule (right conditions and thinning proportions)
  • Polish surface if needed.

Why the resin does not harden?

Possible causes

  • Too low temperature of ambitne,
  • Incorrect proportion of base and herdener,
  • Mixing two components from two different manufacturers

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during whole hardening process,
  • Mix the products thoroughly and bleed the mixture.

How to remove

  • The uncured mass requires complete removal from the surface.

Why are the streaks formed?

Possible causes

  • Wrong viscosity and spraying technique,
  • Failure to maintain proper evaporation time and thickness of layers,
  • Incorrect spraying pressure,
  • Too low temperature of varnish, surface or space ,
  • Wrong thinner or hardener.

How to prevent

  • Apply the right type of application method indicated by manufacturer,
  • Use working spray guns,
  • Both the object and material must have room temperature of 20ﹾC,
  • Apply correct proportion of base and hardener.

How to remove

  • Grinding and polishing,
  • Grinding and painting,
La nostra offerta
Familiarizzate con la nostra offerta di materiali e vernici per la costruzione di barche
Exit
Przewiń na górę