Γλώσσα:

Do you know that last year we modern epoxy fillers recipes?

Ιστοσελίδα » Νέα και προσφορές » Do you know that last year we modern epoxy fillers recipes?
Farby antyporostowe
Do you know that last year we modern epoxy fillers recipes?

Do you know that last year we modern epoxy fillers recipes?  To avoid confusions check on label if product is marked with ikon “new” or not. To find TDS and SDS cards please click this link DOWNLOAD.

Below differences for each Sea-Line epoxy filler.

.

.

.

.

Epoxy filler lightweight

 Epoxy filler lightweightOld recipeNew recipeDiffierences
ColorWhiteWhiteNo changes
Setting time24h20hA faster hardened product means faster readiness for further processing
Pot life 20ﹾC50 minutes50 minutesNo changes
Weight1L = 850 grams1L = 700 gramsLower product’s own weight
Proportions of mixingBy weight – 100:53

By volume – 2:1

By weight – 100:100

By volume – 1:1

Easier proportions of compounds mixing

Epoxy filler universal

Epoxy filler universalOld recipeNew recipeDiffierences
ColorGrayLight grayLighter shade of the new filler
Setting time5h15hLonger setting time
Pot life 20ﹾC10 minutes40 minutes30 minutes longer pot life
Weight1L = 1600 grams1L = 1540 gramsLower product’s own weight
Proportions of mixingBy weight – 100:44

By volume – 2:1

By weight – 100:50

By volume – 2:1

Easier proportions of compounds mixing

 

Epoxy filler with fibreglass

 Epoxy filler with fibreglassOld recipeNew recipeDiffierences
ColorLight greenLight grayColor changes
Setting time24h16hSetting time reduced
Pot life 20ﹾC25 minutes50 minutes25 minutes longer pot life
Weight1L = 1800 grams1L = 1550 gramsLower product’s own weight
Proportions of mixingBy weight – 100:50

By volume – 1:1

By weight – 100:50

By volume – 2:1

Easier proportions of compounds mixing

 

.

.

troton (37)

troton (40)


Μετοχή:

Δείτε επίσης
Άλλα νήματα σε αυτήν την κατηγορία

Οι συχνές ερωτήσεις μας
Απαντήσεις σε συνήθεις ερωτήσεις

Why did the polyurethane topcoat become dull?

Possible causes

  • Too short time for evaporation of the thinner,

How to prevent

  • Maintain the right conditions for complete evaporation of the thinner,

How to remove

  • Mat the surface, degrease and apply the paint according to the rule (right conditions and thinning proportions)
  • Polish surface if needed.

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.

Can I add some thinner to antifouling paint?

There is a possibility of thinning antifouling, but we do not recommend this procedure due to the risk of reducing the effectiveness of the paint. If it is necessary to thin the antifouling paint, it is recommended to dilute it to a maximum of 0-5% (by volume).

Η προσφορά μας
Εξοικειωθείτε με την προσφορά μας σε υλικά και χρώματα ναυπήγησης σκαφών
Exit
Przewiń na górę