Do you know that last year we modern epoxy fillers recipes?

Do you know that last year we modern epoxy fillers recipes? To avoid confusions check on label if product is marked with ikon “new” or not. To find TDS and SDS cards please click this link DOWNLOAD.

Below differences for each Sea-Line epoxy filler.

Epoxy filler lightweight

Epoxy filler lightweight	Old recipe	New recipe	Diffierences
Color	White	White	No changes
Setting time	24h	20h	A faster hardened product means faster readiness for further processing
Pot life 20ﹾC	50 minutes	50 minutes	No changes
Weight	1L = 850 grams	1L = 700 grams	Lower product’s own weight
Proportions of mixing	By weight – 100:53 By volume – 2:1	By weight – 100:100 By volume – 1:1	Easier proportions of compounds mixing

Epoxy filler universal

Epoxy filler universal	Old recipe	New recipe	Diffierences
Color	Gray	Light gray	Lighter shade of the new filler
Setting time	5h	15h	Longer setting time
Pot life 20ﹾC	10 minutes	40 minutes	30 minutes longer pot life
Weight	1L = 1600 grams	1L = 1540 grams	Lower product’s own weight
Proportions of mixing	By weight – 100:44 By volume – 2:1	By weight – 100:50 By volume – 2:1	Easier proportions of compounds mixing

Epoxy filler with fibreglass

Epoxy filler with fibreglass	Old recipe	New recipe	Diffierences
Color	Light green	Light gray	Color changes
Setting time	24h	16h	Setting time reduced
Pot life 20ﹾC	25 minutes	50 minutes	25 minutes longer pot life
Weight	1L = 1800 grams	1L = 1550 grams	Lower product’s own weight
Proportions of mixing	By weight – 100:50 By volume – 1:1	By weight – 100:50 By volume – 2:1	Easier proportions of compounds mixing

Our FAQ

Answers to frequently asked questions

Possible causes

Wrong viscosity and spraying technique,
Failure to maintain proper evaporation time and thickness of layers,
Incorrect spraying pressure,
Too low temperature of varnish, surface or space ,
Wrong thinner or hardener.

How to prevent

Apply the right type of application method indicated by manufacturer,
Use working spray guns,
Both the object and material must have room temperature of 20ﹾC,
Apply correct proportion of base and hardener.

How to remove

Grinding and polishing,
Grinding and painting,

Yes, you can paint the bottom of the boat with polyurethane paint due to its high mechanical strength. We recommend this solution when the boat is not launched for a long time and is not exposed to fouling.

Possible causes

Too short time for evaporation of the thinner,

How to prevent

Maintain the right conditions for complete evaporation of the thinner,

How to remove

Mat the surface, degrease and apply the paint according to the rule (right conditions and thinning proportions)
Polish surface if needed.

Our offer

Familiarize yourself with our offer of boatbuilding materials and paints

Fillers
Smooth surface
Refilling and to tackle inequalities caused by damage to or during the course of production
Fillers
Primers
Safeguard
Protects boat surfaces from the effects of destructive activities osmosis and corrosion
Primers
Topcoats
Aesthetics and beauty
Provide an aesthetic and a perfect look of the boat also protective against water and UV radiation
Topcoats
Antifouling
Bottom protection
Protect the hull from fouling with algae and shells
Antifouling
Polishing
Color and gloss
Effectively remove scratches, refresh the color of gelcoat or paint, fast shine effect
Polishing
Cosmetics
Care and protection
Special preparations for effective cleaning and refinishing
Cosmetics
Resins and repair kits
Repairs and laminating
Laminating, gluing and filling in cracks in gelcoat
Resins and repair kits
Adds
Adds
Range of products useful in the boat builder work
Adds