Linguaggio:

TEAK OIL – NEW 2017

Home » Notizie » TEAK OIL – NEW 2017
Sea Line farby jachtowe
TEAK OIL – NEW 2017

TEAK OIL – NEW 2017

O1 Teak Oil is new product of brand Sea-Line which completes former offer products dedicated for wood protection.

O1 Teak Oil  is one-component oil for exotic wood. Oil for exotic wood which is difficult to impregnate; teak, mahogany, ipe wood, movingiu wood, etc. Excellent penetrating qualities into wood structure and does not leave any greasy layer on surface. O1 TEAK OIL protects wood from dampness and mold growth. It can be applied above and below the waterline as well as inwards it creates an isolating layer, easy in maintenance .
O1 Teak Oil does not change the color of wood. Thanks that it can be used also in garden or home: garden furniture, terraces, parquet, windows,doors etc. O1 Teak Oil should be apply until overall saturation of wood is achieved.
O1 Teak Oil is available in volume 2,5 l and 250 ml. The smaller package was created for those clients which have small elements made of wood.

Theoretical output about 11-12 m2 per litre.


Condividi:

Vedi anche
Altre discussioni in questa categoria

Le nostre FAQ
Risposte alle domande più frequenti

Why did the polyurethane topcoat become dull?

Possible causes

  • Too short time for evaporation of the thinner,

How to prevent

  • Maintain the right conditions for complete evaporation of the thinner,

How to remove

  • Mat the surface, degrease and apply the paint according to the rule (right conditions and thinning proportions)
  • Polish surface if needed.

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.

Why despite the use of antifouing paint the bottom of the boat is overgrown?

Possible causes

  • Too thin layer of antifouling paint,
  • Choosing the wrong antifouling to type of a boat or yacht
  • Thinning of antifouling paint,
  • Incorrect surface preparation before antifouling application.

How to prevent

  • Apply the right layer thickness of paint indicated by manufacturer,
  • Choose antifouling dedicated to type of boat or yacht and suitable for the type of water,
  • Do not thin antifouling because of the risk of reducing effectiveness,
  • Careful surface preparations (grinding, clearing, degreasing),

How to remove

  • Wet grinding, apply new layers of antifouling paint.
  • Use C1 shell and fouling remover.
La nostra offerta
Familiarizzate con la nostra offerta di materiali e vernici per la costruzione di barche
Exit
Przewiń na górę