Lengua:

PLEXI AND POLYCARBONATES – POLISHING INSTRUCTION

Página web » Polishing instructions » PLEXI AND POLYCARBONATES – POLISHING INSTRUCTION
Zabezpieczenie łodzi
PLEXI AND POLYCARBONATES – POLISHING INSTRUCTION

PLEXI AND POLYCARBONATES – POLISHING INSTRUCTION

USE:

SURFACE:

EFECT:

PLEXI AND POLYCARBONATES – POLISHING INSTRUCTION

polishing instructions

OTHERS POLISHING INSTRUCTION:
Practical advice:

Compartir:

Ver también
Otros hilos de esta categoría

Nuestras FAQ
Respuestas a las preguntas más frecuentes

Is it necessary to always sand the surface between application of two different products?

We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.

Can I purchase products directly from you?

We do not sell retail. Our products can be found in many stores in Poland and abroad. Our distributors run stationary and online stores. The full list of distributors and contacts can be found on our website at the following link click here.

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.
Nuestra oferta
Consulte nuestra oferta de materiales y pinturas para la construcción de embarcaciones
Exit
Przewiń na górę