| Type | GRP, laminates, wood | |
| Place | Above and below waterline | |
| Function | Grounding Intercoating Filling coat Antiosmotic | |
| Application | brush, roll, spray gun | |
| Thinning | Yes – thinner for epoxy | |
| Theoretical coverage For 1l | 10-11 m2 for 90 μm WFT/ 60 μm DFT | |
| Number of coats | 1 – 5 | |
| Pot life 20°C | 2 h | |
| Time between layers without sanding | Min 4h Max 5 days | |
| Pack | code | |
| Color (matt) | white | grey |
| 0,750l – 3,0l – 5,0l – 15 l – | 5077 8388 6093 6092 | 9200 9199 X 1312 |
ROLLER / BRUSH
SPRAY
Thinner for all Sea-Line epoxy primers. It is very important to use paint thinners, which provide the appropriate parameters of […]
Cleaner – recommended to degrease the surface before painting. Silicone remover is the product used for surface cleaning before lacquering. […]
CORK SANDING BLOCK FOAM SANDING BLOCK PLASTIC SANDING BLOCK PROTECTIVE FOIL PAPER TOWEL (ROLL) ANTISTATIC RAGS CORK SANDING BLOCK Sanding […]
It is very important to use paint thinners, which provide the appropriate parameters of paint – flow, pot life, time […]
Thinner for all Sea-Line epoxy primers. It is very important to use paint thinners, which provide the appropriate parameters of […]
Do not add more hardener, because after the base has cured, the remaining hardener will react with subsequent layers, which will be applied to the surface and cause defects. For the product to work properly, please follow the proportions given by the manufacturer.
We do not recommend using universal thinners. The use of a thinner with an unknown composition may result in loss of adhesion, lack of proper flow of paint and varnish defects.
It is not recommended to apply 2K paints over 1K paints. 1K and 2K inks differ in their composition and properties, including hardness, chemical resistance and durability. 1K paints are one-component and dry by evaporating the solvent, while 2K paints are two-component and need to be cured by adding a hardener. Applying 2K paint over 1K paint can cause unpredictable chemical reactions and lead to undesirable effects such as dulling, chipping or flaking of the paint. Therefore, always use paints according to the manufacturer’s instructions and do not mix different types of paints. farby zgodnie z instrukcjami producenta i nie mieszać różnych rodzajów farb.
Refilling and to tackle inequalities caused by damage to or during the course of production
Protects boat surfaces from the effects of destructive activities osmosis and corrosion
Provide an aesthetic and a perfect look of the boat also protective against water and UV radiation
Protect the hull from fouling with algae and shells
Effectively remove scratches, refresh the color of gelcoat or paint, fast shine effect
Special preparations for effective cleaning and refinishing
Laminating, gluing and filling in cracks in gelcoat
Range of products useful in the boat builder work
