Langue:

UNIVERSAL YACHT PRIMER 1K

Accueil » Produits » Primaires » UNIVERSAL YACHT PRIMER 1K
Szpachlówki do łodzi
UNIVERSAL YACHT PRIMER 1K


TypeGRP- laminates, wood, stel
PlaceAbove and below waterline
FunctionGrounding
Intercoating
Applicationbrush, roll, spray gun
ThinningThinner for 1 – component primer, varnisch, enamel
Theoretical coverage For 1l~7 m2 for 140 μm WFT/ 65 μm DFT
Number of coats1 – 5
Dust dry 20°C1 h
Resistant against rain 20°C4 h
Waterproof 20°C16 h
Time to launch 20°Cmin. 24 h
Elapsed time before applying next coat 20°Cmin. 5 h
Color (matt)grey
Pack0,750 l2,5 l
code81728174

Partager:

Avez-vous des questions?
Nous vous répondrons dans les plus brefs délais

Produits connexes

de UNIVERSAL YACHT PRIMER 1K


Voir aussi
Autres produits de cette catégorie

Notre FAQ
Réponses aux questions fréquemment posées

Can I degrease surfaces with acetone?

We do not recommend degreasing the surface with acetone, because acetone evaporates very quickly, which affects the quality of cleaning the painted surface.

Why the epoxy filler does not harden?

Possible causes

  • Incorrect proportion of base and herdener,
  • Too low temperature of ambient and surface (less than 10ﹾC),
  • Mixing two components from two different manufacturers,

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
  • Use base and hardener from the same manufacturer

How to remove

  • The uncured mass requires complete removal from the surface.

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.
Notre offre
Familiarisez-vous avec notre offre de matériaux et de peintures pour la construction de bateaux
Exit
Przewiń na górę