DARK COLOR GELCOAT - POLISHING INSTRUCTION

DARK COLOR GELCOAT – POLISHING INSTRUCTION

USE:

Removal of discoloration, chalking gelcoat, dull
Renewing any surface color which has a small mechanical damages and scratches

SURFACE:

Gelcoat (laminate) in dark color

EFECT:

Smooth, free from defects, high gloss finish

DARK COLOR GELCOAT – POLISHING INSTRUCTION

OTHERS POLISHING INSTRUCTION:

Practical advice:

Do not push polishing machine to surface
For the beginning do not apply too much polishing compound, grain should be ground completely during polishing process
Apply more polishing compound only when it is necessary, you will save material used to polishing process

Vedi anche

Altre discussioni in questa categoria

LIGHT COLOR GELCOAT – POLISHING INSTRUCTION
LIGHT COLOR GELCOAT – POLISHING INSTRUCTION USE: Renewing the gelcoat surface of light color with mechanical damage and scratches that […]
LIGHT COLOR GELCOAT – POLISHING INSTRUCTION
PAINT AND VARNISH – POLISHING INSTRUCTION
PAINT AND VARNISH – POLISHING INSTRUCTION USE: Renewing any paint or varnish color which has small mechanical damages Yellowing and […]
PAINT AND VARNISH – POLISHING INSTRUCTION
RENEWING THE SURFACE WITHOUT GRINDING
RENEWING THE SURFACE WITHOUT GRINDING – POLISHING INSTRUCTION USE: Renewal of any color with small mechanical damages and small scratches […]
RENEWING THE SURFACE WITHOUT GRINDING
PLEXI AND POLYCARBONATES – POLISHING INSTRUCTION
PLEXI AND POLYCARBONATES – POLISHING INSTRUCTION USE: Removal of mechanical damage, scratches and dull from the surface of hatches, windows and […]
PLEXI AND POLYCARBONATES – POLISHING INSTRUCTION

Le nostre FAQ

Risposte alle domande più frequenti

Possible causes

Wrong viscosity and spraying technique,
Failure to maintain proper evaporation time and thickness of layers,
Incorrect spraying pressure,
Too low temperature of varnish, surface or space ,
Wrong thinner or hardener.

How to prevent

Apply the right type of application method indicated by manufacturer,
Use working spray guns,
Both the object and material must have room temperature of 20ﹾC,
Apply correct proportion of base and hardener.

How to remove

Grinding and polishing,
Grinding and painting,

If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.

We do not recommend degreasing the surface with acetone, because acetone evaporates very quickly, which affects the quality of cleaning the painted surface.

La nostra offerta

Familiarizzate con la nostra offerta di materiali e vernici per la costruzione di barche

Stucchi
Riempimento di cavità
Il patch e compensare le irregolarità derivanti da danni durante la produzione
Stucchi
Primer
La sicurezza duratura
Barca protezione superficiale contro l’influenza di azioni distruttive di osmosi e la corrosione in ambienti difficili
Primer
Smalti e vernici
Protezione ed estetica
Protezione contro l’acqua e contro gli effetti negativi delle radiazioni UV
Smalti e vernici
Antivegetativa
Proteggere il fondo
Proteggere la parte inferiore della barca prima-tedesco ricoperta di alghe e conchiglie. La prevenzione dell’azione di acqua.
Antivegetativa
Lucidatura
Luminosità e colore
Rimozione efficace di ritenzione graffi, di aggiornamento e il colore del mantello gel o lacca
Lucidatura
Resina
Riparazione e laminazione
Laminazione, incollaggio e tappatura perdite
Resina
Kit riparazione
Recupero rapido
Per il riempimento di piccole fessure e ubyt gemme in gelcoat
Kit riparazione
Complementari
Extra
Una gamma di prodotti utili quando si lavora costruttore di barche
Complementari