Linguaggio:

Polymer

Home » Prodotti » Accessori » Polymer
Naprawa łodzi
Polymer

Is elastic sealant recommended for sealing and bonding various types of materials.

PRODUCT DESCRIPTION:

POLYMER is recomended for use on :




Characteristic features of POLYMER

BASIC INFORMATION:

MS POLYMER

Type laminat, steel, wood, concret, plexi, etc.
PlaceAbove and below waterline
Functionsealing

bonding

Chemical characterhybrid
Densinity1,44 g/cm³
Curing mechanizmapsorption of moisture from air
Elogation at breakto 500% (DIN 53 504)
Tensile strenght3,0 N/mm² (DIN 53 504)
Tear resistance20 N/mm
Resistant to temperatures-40ºC to + 90ºC
Resistant to temperatures for short intervalsto +120ºC (white, black)
to +100ºC (transparent)
Time for skin formation 20ºC15 minut
Curing time 20ºC24 h (weld to 3 mm)
Time to contact with water 20ºCmin. 30 minutes
Time to be painted 20ºC3 day
Shrinkno

COLOR / PACKAGING / CODE

WHITE 200 ml  /  code : 8208

BLACK 200 ml  /  code : 8210

TRANSPARENT 200 ml  /  code : 8211

SURFACE PREPARATION:

Apply on surfaces no need to priming.

Steel surfaces is recommend to prime using Epoxy Anticorrosion primer 4:1 Sea-Line.

Wood and concrete is recommend to prime using Epoxy Woodprimer 10:4 Sea-Line.
In case of application on natural wood, its humidity should be lower than 20%.

Clean surfaces from rust, damage paint coatings, etc. To increase adhesion, is recommend to sand surfaces by sand paper :

Clean surfaces from dust and contamination.

Grease and salt remove using Cleaner Sea-Line®

APPLICATION:

Thanks to advance dispensing system, POLYMER does not require extra tools to application,  provides exact thickness of weld during application.


MS POLYMER 1

unlock nozzle


MS POLYMER 2

unlock dosing regulator


MS POLYMER 3

set dosing regulator accordance with the needs


MS POLYMER 4

apply product by pressing lever


MS POLYMER 5

after finishing  application, secure dosing nozzle and block dosing regulator


Technical information:


Condividi:

Avete domande?
Ti risponderemo il prima possibile

Prodotti correlati

da Polymer


Vedi anche
Altri prodotti in questa categoria

Le nostre FAQ
Risposte alle domande più frequenti

Is it necessary to always sand the surface between application of two different products?

We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.

Can I purchase products directly from you?

We do not sell retail. Our products can be found in many stores in Poland and abroad. Our distributors run stationary and online stores. The full list of distributors and contacts can be found on our website at the following link click here.

Why does the paint have no adhesion?

Possible causes

  • Wrong surface preparation,
  • Skipping the primer in the system application process,
  • Use of universal thinners or replacements ,
  • Paint incompatibility.

How to prevent

  • Correct surface preparation (grinding, clearing, degreasing),
  • Use primers which improve adhesion of paints,
  • Use thinners which are dedicated to each paints,
  • Use of paints which are compatible to each other.

How to remove

  • Grind, clean and paint again.
La nostra offerta
Familiarizzate con la nostra offerta di materiali e vernici per la costruzione di barche
Exit
Przewiń na górę