Non skid powder is anadditive for polyurethane topcoats. Non-slip powder = 20 grams, the amount for 750 ml of polyurethane or other surface topcoats. Add powder to the mixture, mix well and wait 15 minutes. Apply with a short-haired roller. During application, paint must be mixed often.
Dose for can 0,75l.
| Pack 20g | code 5474 |
The type of polishing applicator determines the efficiency of removal of defects. Depending on your needs we offer wool lamb […]
Gelcoat additive – paraffin Paraffin is an additive mainly to polyester gelcoats, necessary when it is necessary to apply the […]
Polyurethane topcoat yacht paint especially recommended above the waterline. UV resistance and weathering. High Gloss. High mechanical strength. The viscosity […]
DUST MASK DISPOSABLE NITRILE GLOVES “MASTER” DISPOSABLE NITRILE GLOVES WORKWEAR – SINGLE USE POLYESTER WORKWEAR (blue) reusable overall PASTE HAND […]
Yes, you can paint the bottom of the boat with polyurethane paint due to its high mechanical strength. We recommend this solution when the boat is not launched for a long time and is not exposed to fouling.
We do not recommend degreasing the surface with acetone, because acetone evaporates very quickly, which affects the quality of cleaning the painted surface.
Refilling and to tackle inequalities caused by damage to or during the course of production
Protects boat surfaces from the effects of destructive activities osmosis and corrosion
Provide an aesthetic and a perfect look of the boat also protective against water and UV radiation
Protect the hull from fouling with algae and shells
Effectively remove scratches, refresh the color of gelcoat or paint, fast shine effect
Special preparations for effective cleaning and refinishing
Laminating, gluing and filling in cracks in gelcoat
Range of products useful in the boat builder work
