Language:

Rewelacyjny Bandzior

Home » Reviews » Rewelacyjny Bandzior
Naprawa łodzi

Renovation of the Spanish motorboat Ducauto caribe

“Cut in half, gutted and made according to my own concept. The work took four years as soon as I had some free time.
Fiberglass boat. I added some waterproof plywood for lockers, the rest of the products are all from Sea-Line:
epoxy putties, Lightprimer primer, polyurethane topcoat. Everything turned out great. “Tomasz Fras

Zdjęcia: Tomasz Fras

Share:

See also
Other threads in this category

Our FAQ
Answers to frequently asked questions

Why the epoxy filler does not harden?

Possible causes

  • Incorrect proportion of base and herdener,
  • Too low temperature of ambient and surface (less than 10ﹾC),
  • Mixing two components from two different manufacturers,

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
  • Use base and hardener from the same manufacturer

How to remove

  • The uncured mass requires complete removal from the surface.

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.

Is it necessary to always sand the surface between application of two different products?

We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.

Our offer
Familiarize yourself with our offer of boatbuilding materials and paints
Exit
Przewiń na górę