Cut level = 8
Gloss level = 6
NO SILICONE
TEXTURE :
PACKAGING:
APPLICATION METHODS:
S0 polishing compound Sea-Line is a polishing paste is designed for professionals – manufacturers, shipyards and products where it forms the outer layer of the technical gelcoat or industrial topcoat with a high hardness.
S0 polishing compound removes imperfections after sanding grit sandpaper, even P800 (depending on the hardness of the surface). The paste is designed to work with with machines with a maximum rotation speed of 2000.
Best when applied with wool and hard sponges.
Surfaces | gelcoat, polyurethane paints and varnishes, | |||
Function | removing defects from the surface gloss restoring | |||
Consistency | paste | |||
Surface preparation * | mechanical grinding | manual grinding | ||
light color | dark color | light color | light color | |
gelcoat | P800 ⇒ | P1200 ⇒ | P1200 ⇒ | P1500 ⇒ |
polyurethane paint | P1200 ⇒ | P1500 ⇒ | P1200 ⇒ | P1500 ⇒ |
hign hardness surfaces | P1200 ⇒ | P1500 ⇒ | P1500 ⇒ | P2000 ⇒ |
* grinding paper minimal gradation
Surface preparation :
Clean the surface destined for polishing. If removing defects is necessary, polish the surface with sandpaper of the following gradation preliminary polishing: <P500
Polish the surface with sandpaper of final gradation : P800 →
Dark colours or hard surfaces polish the surface with sandpaper of final gradation : P1200 →
More applicators Sea-Line® / BRAYT
(code: 300006613)
Polishing sponge whit velcro :
Polishing wool BALL (80mm) Sea-Line :
(code : 300006619)
Clean the surface, apply the compound onto an element or head (wool or tough sponge)
Apply the compound at minimum rotations on the whole surface that is being polished (800-1000 rotations/min) polishing until it changes colour and the compound changes its texture
Slowly increase the speed max. to 1800 RPM working with a little pressure
Clean the surface.
S3 FINISH CLEANER – SHINE CONTROL is a product for all types of paints,varnishes – including HS, 2K, nitro, synthetic […]
Sea-Line Brayt S5 it is quick and easy in use product on base wax, recommended for every smooth and gloss […]
PASTA ABRASIVA FORTE FORZA ABRASIVA = 9 LIVELLO DI LUCENTEZZA = 8 NO SILICONE DESCRIZIONE DEL PRODOTTO : Questa pasta ha una elevata […]
S1 PASTA ABRASIVA FORZA ABRASIVA = 6 LIVELLO DI LUCENTEZZA = 8 NO SILICONE Sea-Line S1 preffesional Marine polishing paste is […]
Do not add more hardener, because after the base has cured, the remaining hardener will react with subsequent layers, which will be applied to the surface and cause defects. For the product to work properly, please follow the proportions given by the manufacturer.
Yes, you can mix Sea-Line polyurethane paints. The only difference are the pigments of polyurethane paints that determine the color of the paint. But remember to keep the right proportions of base, hardener and thinner.
We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.
Il patch e compensare le irregolarità derivanti da danni durante la produzione
Barca protezione superficiale contro l’influenza di azioni distruttive di osmosi e la corrosione in ambienti difficili
Protezione contro l’acqua e contro gli effetti negativi delle radiazioni UV
Proteggere la parte inferiore della barca prima-tedesco ricoperta di alghe e conchiglie. La prevenzione dell’azione di acqua.
Rimozione efficace di ritenzione graffi, di aggiornamento e il colore del mantello gel o lacca
Laminazione, incollaggio e tappatura perdite
Per il riempimento di piccole fessure e ubyt gemme in gelcoat
Una gamma di prodotti utili quando si lavora costruttore di barche