Cut level = 10
Gloss level = 6
NO SILICONE
S07 Heavy Cut Sea-Line is specialistic polishing paste with a very high cutting force which guarantee quick removal of defects and grinding scratches from a different kind of gelcoat (especially for polishing of industrial gelcoat)
S07 Heavy Cut Sea-Line is primarily designed for the companies which produce goods in which the outer layer is gelcoat or forms made from utility gelcoat and an industrial topcoat with a high toughness degree.
S07 Heavy Cut Sea-Line removes grinding scratches from gelcoat surface after treatment with sandpaper of gradation P800 or higher. The best results on industrial gelcoat we obtain when we finish grinding with sandpaper P1200 or higher.
Using S07 compound allows for shortening the labour time thanks to a high cutting force and gloss in final stage of work.
TEXTURE :
PACKAGING:
APPLICATION METHODS:
Surfaces | tool gelcoat (technical), gelcoat, | |||
Function | removing defects from the surface gloss restoring | |||
Consistency | paste | |||
Surface preparation * | mechanical grinding | manual grinding | ||
light color | dark color | light color | dark color | |
gelcoat | P800⇒ | P1200⇒ | P800⇒ | P1200⇒ |
tool gelcoat (technical) | P1200⇒ | P1500⇒ | P2000⇒ | |
high hardness surfaces | P1200⇒ | P1500⇒ | P2000⇒ |
Surface preparation :
Clean surface destined for polishing.
Polish surface with sandpaper of final gradation : P800 →
Dark colours or hard surfaces polish with sandpaper of final gradation : P1200 →.
More applicators Sea-Line® / BRAYT
(code: 300006613)
Polishing sponge whit velcro :
(white – code : 300000384)
Clean surface, apply compound onto an element or head (wool or tough sponge)
Apply compound at minimum rotations on the whole surface that is being polished (800-1000 rotations/min) polishing until it changes colour and compound changes its texture
Slowly increase speed max. to 1800 RPM working with a little pressure
Further steps :
Clean surface. If after using S07 left any defects:
S1 SOFT CUT & GLOSS – Polishing paste thanks to its versatility can be used in industrial as well as […]
Polishing systems meet all stages of production, as well as during repair work, renovations or treatments. Different hardness of materials, […]
S0 POLISHING COMPOUND – FAST CUT & MEDIUM GLOSS Cut level = 8 Gloss level = 6 NO SILICONE TEXTURE […]
S1 PREMIUM POLISHING COMPOUND – ONE STEP, CUT & HIGH GLOSS Cut level = 8 Gloss level = 9 NO […]
Sea-Line HARD and Sea-Line self-polishing antifouling are not intended for aluminum surfaces. They include copper oxide, which in contact with aluminum causes galvanic corrosion. Especially on aluminum, we offer ALU-PLUS self-polishing anti-fouling paint, which, in addition to excellent adhesion to aluminum, is also 30% more effective than traditional anti-fouling paints.
It is not recommended to apply 2K paints over 1K paints. 1K and 2K inks differ in their composition and properties, including hardness, chemical resistance and durability. 1K paints are one-component and dry by evaporating the solvent, while 2K paints are two-component and need to be cured by adding a hardener. Applying 2K paint over 1K paint can cause unpredictable chemical reactions and lead to undesirable effects such as dulling, chipping or flaking of the paint. Therefore, always use paints according to the manufacturer’s instructions and do not mix different types of paints. farby zgodnie z instrukcjami producenta i nie mieszać różnych rodzajów farb.
Refilling and to tackle inequalities caused by damage to or during the course of production
Protects boat surfaces from the effects of destructive activities osmosis and corrosion
Provide an aesthetic and a perfect look of the boat also protective against water and UV radiation
Protect the hull from fouling with algae and shells
Effectively remove scratches, refresh the color of gelcoat or paint, fast shine effect
Special preparations for effective cleaning and refinishing
Laminating, gluing and filling in cracks in gelcoat
Range of products useful in the boat builder work