Linguaggio:

Sea-Line joins trade association ICOMIA

Home » Notizie » Sea-Line joins trade association ICOMIA
Kosmetyki do naprawy łodzi oraz jachtów
Sea-Line joins trade association ICOMIA

We are pround to join ICOMIA as a Sustaining Member.

ICOMIA is the international trade association representing the global marine industry since 1966. ICOMIA brings together marine industry associations from across the world in one global organisation and represents them at international level, presenting a strong and united voice when dealing with issues challenging the industry.

Main reason why we are joining ICOMIA is the fact that the chemical industry where we operate is facing with dynamical changes in regulations of EU and regulations of individual countries. Sometimes directives are contradictory or difficult to interpret. We hope that with the support of the chamber we will be able to keep up with them and be ahead of them enough to offer our customers a safe and sustainable product. We are looking forward to synergy of community of yachting paints and chemicals producers.

http://www.icomia.org/


Condividi:

Vedi anche
Altre discussioni in questa categoria

Le nostre FAQ
Risposte alle domande più frequenti

Is it necessary to always sand the surface between application of two different products?

We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.

Why are the streaks formed?

Possible causes

  • Wrong viscosity and spraying technique,
  • Failure to maintain proper evaporation time and thickness of layers,
  • Incorrect spraying pressure,
  • Too low temperature of varnish, surface or space ,
  • Wrong thinner or hardener.

How to prevent

  • Apply the right type of application method indicated by manufacturer,
  • Use working spray guns,
  • Both the object and material must have room temperature of 20ﹾC,
  • Apply correct proportion of base and hardener.

How to remove

  • Grinding and polishing,
  • Grinding and painting,

Do you have to paint the scratched side of the boat?

If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.

La nostra offerta
Familiarizzate con la nostra offerta di materiali e vernici per la costruzione di barche
Exit
Przewiń na górę