Use biocides safely. Always read the label and product information before use.
Type | GRP laminates, wood, steel | |||||
Place | Below waterline | |||||
Function | Antifouling paint discourages the growth of barnacles, weed, and other water life on the submersed hull of the boat. | |||||
Application | brush, roll airless spray gun (only professional) | |||||
Thinning * | No recommended | |||||
Theoretical coverage For 1l | by roller | by spray | ||||
9 ~ 10 m² | 3 ~ 5 m² | |||||
Coat thickness (WTF) | 98 μm | 196 μm | ||||
Finish thickness (DTF) | 50 μm | 100 μm | ||||
Coats number | 2 | 1 | ||||
Recommended dry layer | 100 μm | |||||
Hardening the surfaces | 23ºC | 15ºC | ||||
Touch dry | 30 minutes | 45 minutes | ||||
Immersion: | 4 hours | 6 hours | ||||
Dry to recoat (overcoating) | min. 6 hours | min. 10 hours | ||||
Dry to launch (immersion times) | max 6 months | max 6 months | ||||
Pack | 0,75 l | 2,5 l | ||||
Color ** | code | code | ||||
white red blue navy black | 300008388 300008390 300008392 300008394 300008396 | 300008387 300008389 300008391 300008393 300008395 |
In the case of high temperatures and the need to thin the antifouling paint, a maximum dilution of 0-5% (by volume) is recommended.
Dilution and the application method directly affect the thickness of the antifouling paint layer.
Special attention should be paid to obtaining a specific coating thickness (100 μm DTF), which ensures the effective operation of the antifouling paint.
Exposure of a freshly applied antifouling paint to moist air can lead to color change. The discoloration is only superficial and does not affect the effectiveness of the antifouling paint. Due to the content of copper oxide, a small color difference between the parts of the antifouling paint is acceptable.
PROFESSIONELLE FLACHPINSEL SEA-LINE® FLACHPINSEL SEA-LINE® LAMMFELLROLLE SEA-LINE® FARBSCHALE SEA-LINE® MISCHSPACHTEL SEA-LINE® MESSBECHER SEA-LINE® PAPER PAINT STRAINER PROFESSIONELLE FLACHPINSEL SEA-LINE® PROFESSIONELLE […]
Schützen Sie Bereiche unterhalb der Wasserlinie. Einsetzbar auf Aluminium (Leichtmetalllegierung), Stahl, Holz und Glasfaserrümpfen. Ist für Leichtmetalllegierung (Aluminium) – Rümpfe […]
SELBSTPOLIERENDES ANTIFOULING Sea-Line® Selbstpolierendes Antifouling, für Salz – und Süßwasser geeignet. Für Segel – und Motorboote mit einer Höchstgeschwindigkeit von 40 […]
HARD ANTIFOULING paint: Hart-Matrix Bewuchs Schutzfarbe gegen Bewuchs auf Basis von Kupferoxid und Harzen Für Segel – und Motorboote mit […]
Ja, Sie können Sea-Line Polyurethanfarben mischen. Der einzige Unterschied sind die Pigmente von Polyurethanfarben, welche die Färbung der Farben bestimmen. Behalten Sie immer die richtigen Verhältnisse von Basis, Härter und Verdünner bei.
Wir verkaufen unsere Produkte über den Einzelhandel. Unsere Produkte können in vielen Geschäften in Polen und im Ausland gefunden werden. Unsere Distributoren betreiben stationäreund Online-Shops. Die vollständige Liste der Distributoren und Kontakte finden Sie auf unserer Website unter folgendem Link hier klicken
Zum Spachteln oder Ausgleichen von Ungleichmäßigkeiten, die durch Schäden verursacht wurden
Schützt alle Bootsoberflächen vor Zerstörung durch Osmose oder Korrosion
Schützende und ästhetische Decklacke
Schutz des Bootes vor Bewuchs mit Algen und Muscheln
Entfernt Kratzer effektiv. Frischt Gelcoats und Decklacke schnell auf und bringt sie wieder zum Glänzen
Spezielle Produkte zur effektiven Reinigung und Pflege
Laminieren, Kleben und Füllen von Schäden
Eine Vielzahl von Produkten für alle Arbeiten rund ums Boot