Langue:

Système de polissage

Accueil » Nouvelles et promotions » Système de polissage
Sea Line farby jachtowe
Système de polissage

Système de polissage sur la base très polyvalent et facile à travailler la pâte à polir et complémentaires des produits et des matériaux sous forme de lotions, applicateurs, lingettes, je veux dire tout ce qui est nécessaire pour obtenir le meilleur résultat final.

Pâte de polissage Brayt® S1 est un agent de polissage très efficace comportant pas de silicone. Recommandé pour le polissage bateau gelcoat surfaces, fabrication de matériaux composites et les revêtements. Il élimine rapidement les défauts après ponçage au papier de verre, et d’autres dommages en cours d’utilisation afin de garantir la réception d’une surface idéale.

Le second produit est recommandé pour les applications notre hobby émulsion Brayt® S2. Il est conçu pour éliminer tous les défauts de surface mineurs et rafraîchir les couleurs sombres, qui ont intrinsèquement une forte tendance à se décolorer.

Pour préserver le bel effet pour un temps pour terminer notre travail, nous offrons liquide Brayt® S3. Il est un produit pour ceux qui veulent garder les bateaux à naviguer toujours ils regardent belle. Le S3 liquide est très polyvalent et son utilisation est très facile. Nous pulvérisé surface sans se soucier de savoir si elle est un gelcoat, la peinture ou le verre avec un joint ou une partie en plastique. Il suffit de vaporiser, étaler et essuyez à un éclat.


Partager:

Voir aussi
Autres threads de cette catégorie

Notre FAQ
Réponses aux questions fréquemment posées

Do you have to paint the scratched side of the boat?

If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.

Why are the streaks formed?

Possible causes

  • Wrong viscosity and spraying technique,
  • Failure to maintain proper evaporation time and thickness of layers,
  • Incorrect spraying pressure,
  • Too low temperature of varnish, surface or space ,
  • Wrong thinner or hardener.

How to prevent

  • Apply the right type of application method indicated by manufacturer,
  • Use working spray guns,
  • Both the object and material must have room temperature of 20ﹾC,
  • Apply correct proportion of base and hardener.

How to remove

  • Grinding and polishing,
  • Grinding and painting,

Can I add more hardener to speed up the reaction?

Do not add more hardener, because after the base has cured, the remaining hardener will react with subsequent layers, which will be applied to the surface and cause defects. For the product to work properly, please follow the proportions given by the manufacturer.

Notre offre
Familiarisez-vous avec notre offre de matériaux et de peintures pour la construction de bateaux
Exit
Przewiń na górę