Γλώσσα:

ΠΡΟΣΤΑΤΕΥΤΙΚΕΣ ΤΑΙΝΙΕΣ βαφής

Ιστοσελίδα » Προϊόντα » Συμπληρωματικά προϊόντα » ΠΡΟΣΤΑΤΕΥΤΙΚΕΣ ΤΑΙΝΙΕΣ βαφής
Kosmetyki do naprawy łodzi oraz jachtów


MASKING TAPE

High-quality masking tape characterized by very good adhesion on irregular surfaces, easy to remove without leave any  adhesive residue. Saturated paper backing makes tape compatible with most common paints and lacquers. Heat resistant up to 800C. Backing: yellow saturated crepe paper, adhesive: rubber solvent based.

tasma lakiernicza

19 mm x 50 m300000530
25 mm x 50 m300000531
30 mm x 50 m300000532
38 mm x 50 m300000533
50 mm x 50 m300000534

MASKING TAPE – MASTER “AQUA”

tasma aqua

25 mm x 50 m300002043

SILVER TAPE – UNIVERSAL

Strong tape of universal application, of the width of 50mm and the length of 25 m, with the allocation for metal, plastic, rubber, waterproof, of silver colour, irreplaceable in automotive industry and household.

tasma uniwersalna

25 mm x 50 m300002931

Μετοχή:

Έχετε ερωτήσεις;
Θα απαντήσουμε το συντομότερο δυνατό
 
Δείτε επίσης
Άλλα προϊόντα αυτής της κατηγορίας

Οι συχνές ερωτήσεις μας
Απαντήσεις σε συνήθεις ερωτήσεις

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.

Why despite the use of antifouing paint the bottom of the boat is overgrown?

Possible causes

  • Too thin layer of antifouling paint,
  • Choosing the wrong antifouling to type of a boat or yacht
  • Thinning of antifouling paint,
  • Incorrect surface preparation before antifouling application.

How to prevent

  • Apply the right layer thickness of paint indicated by manufacturer,
  • Choose antifouling dedicated to type of boat or yacht and suitable for the type of water,
  • Do not thin antifouling because of the risk of reducing effectiveness,
  • Careful surface preparations (grinding, clearing, degreasing),

How to remove

  • Wet grinding, apply new layers of antifouling paint.
  • Use C1 shell and fouling remover.

Can I paint the bottom of the boat with polyurethane paint?

Yes, you can paint the bottom of the boat with polyurethane paint due to its high mechanical strength. We recommend this solution when the boat is not launched for a long time and is not exposed to fouling.

Η προσφορά μας
Εξοικειωθείτε με την προσφορά μας σε υλικά και χρώματα ναυπήγησης σκαφών
Exit
Przewiń na górę