Use biocides safely. Always read the label and product information before use.
Type | GRP laminates, wood, steel | |||||
Place | Below waterline | |||||
Function | Antifouling paint discourages the growth of barnacles, weed, and other water life on the submersed hull of the boat. | |||||
Application | brush, roll only professional : airless spray gun or conventional spray | |||||
Thinning * | No recommended | |||||
Theoretical coverage For 1l | by roller | by spray | ||||
11 ~ 12 m² | 4 ~ 6 m² | |||||
Coat thickness (WTF) | 80 μm | 160 μm | ||||
Finish thickness (DTF) | 30 μm | 60 μm | ||||
Coats number | 2 | 1 | ||||
Recommended dry layer | 60 μm | |||||
Hardening the surfaces | 23ºC | 15ºC | ||||
Touch dry | 20 minutes | 30 minutes | ||||
Immersion: | 2 hours | 3 hours | ||||
Dry to recoat (overcoating) | min. 6 hours | min. 10 hours | ||||
Dry to launch (immersion times) | max 6 months | max 6 months | ||||
Pack | 0,75 l | 2,0 l | ||||
Color | code | code | ||||
Graphite | 300008380 | 300008379 |
In the case of high temperatures and the need to thin the antifouling paint, a maximum dilution of 0-5% (by volume) is recommended.
Dilution and the application method directly affect the thickness of the antifouling paint layer.
Special attention should be paid to obtaining a specific coating thickness (100 μm DTF), which ensures the effective operation of the antifouling paint.
Fouling Stop SEAGUARD – a new anti-fouling paint for hulls. SEAGUARD does not contain active ingredients, i.e. toxic biocides. The bottom […]
Silver Cruise Polishing Antifouling it’s effectively preventing fouling organism: aquatic plants and animals or slime. Ideal paint for professional and […]
HARD ANTIFOULING paint: Suitable for salty and regular water. Suitable for sailing and motor boats traveling with a maximum speed […]
Silver Speed HARD Antifouling is a hard antifouling paint, effectively preventing fouling organism: aquatic plants and animals or slime. Ideal […]
There is a possibility of thinning antifouling, but we do not recommend this procedure due to the risk of reducing the effectiveness of the paint. If it is necessary to thin the antifouling paint, it is recommended to dilute it to a maximum of 0-5% (by volume).
Do not add more hardener, because after the base has cured, the remaining hardener will react with subsequent layers, which will be applied to the surface and cause defects. For the product to work properly, please follow the proportions given by the manufacturer.
We do not recommend using universal thinners. The use of a thinner with an unknown composition may result in loss of adhesion, lack of proper flow of paint and varnish defects.
Refilling and to tackle inequalities caused by damage to or during the course of production
Protects boat surfaces from the effects of destructive activities osmosis and corrosion
Provide an aesthetic and a perfect look of the boat also protective against water and UV radiation
Protect the hull from fouling with algae and shells
Effectively remove scratches, refresh the color of gelcoat or paint, fast shine effect
Special preparations for effective cleaning and refinishing
Laminating, gluing and filling in cracks in gelcoat
Range of products useful in the boat builder work